« previous next »
Pages: [1]   Go Down

Author Topic: Fed with front suspension  (Read 2675 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Fed with front suspension
« on: October 23, 2020, 08:33:50 PM »
Not to derail Curly's thread on bounce. I have been looking at few front suspension ideas on RED's and possibly doing FED front end similar. With my chassis the front half( just past motor mounts) can be removed with 4 bolts. I like the diamond chassis front shock deal that is in middle of chassis. Thinking about building one this winter to try. Might do awya with top end bounce when getting off throttle in hurray. Not big deal for lots here but if bracket racing it could be. I know the purist are going to hate it. Sorry but I built car to run brackets and be different. Making it handle and work the best I can is my main goal.

Any ideas or suggestions?
« Last Edit: October 25, 2020, 01:35:57 PM by wideopen231 »
Logged
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline BK

  • Sr. Member
  • ****
  • Posts: 310
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Re: Fed with front suspension
« Reply #1 on: October 25, 2020, 07:18:00 PM »
If you do the Diamond style and have a front overhang, chances are you will break out if you use the breaks at the finish line.
Logged

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: Fed with front suspension
« Reply #2 on: October 25, 2020, 07:25:49 PM »
OTOH, with a little creative use of a canard wing for down force you can shorten your side of the race track by about 30". Just sayun'...
Logged

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: Fed with front suspension
« Reply #3 on: October 25, 2020, 09:03:37 PM »
Not sure how you mean. Nose is going to break beam at finish regardless. Finish line beams are 5" or so and no way my 30" nose at 3" will not be tripping it. Something I am missing?
Logged
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: Fed with front suspension
« Reply #4 on: October 26, 2020, 11:53:39 AM »
I see your point now. A car should stage off the front tire and always trip the finish beam with the nose - or never - to get consistent e.t.s.
Not tripping the finish beam with a nosepiece, i.e. nothing protruding past the front tire like BK's avatar RED, makes your race course a couple of feet longer than if you have body work.
« Last Edit: October 26, 2020, 11:57:13 AM by THE FRENCHTOWN FLYER »
Logged
Pages: [1]   Go Up
« previous next »