FEDs Forever!
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Calendar
Login
Register
FrontEngineDragsters.Org Forum
»
Technical
»
Spud Miller's Cave
»
Small amount of nitro or m5
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Small amount of nitro or m5 (Read 8405 times)
masracingtd1167
Hero Member
Posts: 1110
bill masiello Shelton Ct.
Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
Your Engine: 394 chevy
Your Track: Lebanon Valley Dragway
Your Vehicle: 2003 Neil and Parks
Small amount of nitro or m5
«
on:
April 01, 2013, 01:53:13 PM »
Hi Spud I am not shure if this would work for me or not . If I wanted to pick my car up a little let's just say 3 tenth's do you think going to m5 methanol or 20 pecent nitro would do it . The only problem I see is my compression is 14.8 . I do run pretty big cam 280 Int 294 Ex 114 CL I run a pair of Ron's terminators on a sheetmetal intake a 0and a half pump 37 nozzle 88 main jet no high speed The way the car sit's right now it will go high 7.40's and that's with a tight 6400 converter and 1560 lbs . I have sprayed it with a 200 shot of nitrous and gone 6.94 . I would like to be able to run the 7.0 pro class but you can't run nitrous . Also if I took all the nitrous stuff off it would be about 60 lbs lighter Thank's Bill
Logged
slingshot383
Full Member
Posts: 143
Your Best Time: 1/4 mi. 7.95 @ 168
Your Engine: Chrysler, alcohol, 528 cu.in.
Your Track: Gateway Motorsports Park (the Swamp)
Your Vehicle: Undercover Chassis 23T altered
Re: Small amount of nitro or m5
«
Reply #1 on:
April 01, 2013, 05:00:21 PM »
I've run 18% in a 528 Mopar with iron 440-1 heads and that much compression. Car loved it, #3 quench area of the head, not so much, blew out a 2.5" x 1.5" piece of the head. But, I think it was a thin area and was destended to fail anyway.
Logged
Undercover 23T Altered, big block Mopar
Member of the Torque and Recoil Club
Spud Miller
Global Moderator
Sr. Member
Posts: 332
Re: Small amount of nitro or m5
«
Reply #2 on:
April 04, 2013, 07:54:21 PM »
Hi Bill,
I don't think 20% is going to get you 3 tenths. Probably take 30% or a little more and you would definitely have problems with that much compression ratio. Heads, head gaskets, bearings...
Lower that squeeze and I think you'd do great by putting more juice in it. Swap out those pistons for something with less dome and away you go!
Logged
Fuel Injection Enterprises, LLC
Mechanical Injection
Magnetos
EFI Conversions
George
Hero Member
Posts: 515
Your Vehicle: 1964 Mercury Comet Super Stock/ M automatic
General Location: Midwest USA
Re: Small amount of nitro or m5
«
Reply #3 on:
May 20, 2013, 04:32:32 AM »
I played with some M5 late last year and it didn't show any improvement over my " cheap stuff".
Logged
masracingtd1167
Hero Member
Posts: 1110
bill masiello Shelton Ct.
Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
Your Engine: 394 chevy
Your Track: Lebanon Valley Dragway
Your Vehicle: 2003 Neil and Parks
Re: Small amount of nitro or m5
«
Reply #4 on:
May 20, 2013, 10:25:13 AM »
George did you fatten it up at all? They say about 10 percent richer
Logged
COKER
Newbie
Posts: 8
Your Track: Oriley Race Way Park
Your Vehicle: FED
Re: Small amount of nitro or m5
«
Reply #5 on:
June 22, 2013, 03:28:24 PM »
'Spud,
Congratulations on your magazine article you deserve it. On the low amount of nitro issue Rich Barnard out of Ohio had a big block with aluminum heads and 12.5:1 compression on alky and best he ran was 8.16 and was frustrated with the performance of the car. I mixed him up 25% and right out of the box he went 8.02, 8.01 and on a 8.00 index run he went 7.96. Like you I don't recommend the nitro much with 14:1 compression. It did seem to me with the engine set to run nitro you gained a tenth for every 10% you added. I found it to be a good tuning tool.
coker
Logged
George
Hero Member
Posts: 515
Your Vehicle: 1964 Mercury Comet Super Stock/ M automatic
General Location: Midwest USA
Re: Small amount of nitro or m5
«
Reply #6 on:
June 26, 2013, 05:26:07 AM »
Quote from: masracingtd1167 on May 20, 2013, 10:25:13 AM
George did you fatten it up at all? They say about 10 percent richer
Yes I did. But I will try it again soon. I got a few things figured out.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
FrontEngineDragsters.Org Forum
»
Technical
»
Spud Miller's Cave
»
Small amount of nitro or m5