Author Topic: Tuning Help  (Read 10760 times)

dreracecar

  • Guest
Re: Tuning Help
« Reply #15 on: August 12, 2017, 02:54:08 PM »
All this go fast wizz bang trickery stuff, YOU DONT NEED IT!!!! it complicates everything, standard opening on the bottom, nozzles in the hat gets you 7's and 200mph, I have proof!!! No EGT's, just 2 threads of heat on all 8 spark plugs

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Tuning Help
« Reply #16 on: August 12, 2017, 05:48:51 PM »
Didn't you ask me if I had EGTs?

I did not believe what they were telling me so I looked at the plugs.

The bottom of the plugs in 2 and 7 show heat all the way around on the base, but not into the threads.

The rest of the plugs look brand new and show no heat at all.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline coupemerc

  • Sr. Member
  • ****
  • Posts: 306
    • View Profile
  • Your Best Time: 3.86@188 (1/8 Mile), 5.97@233 (1/4 Mile)
Re: Tuning Help
« Reply #17 on: August 15, 2017, 03:55:51 PM »
Ken Veney told me the story about his old Ford Cleveland powered Top Alcohol Dragster. He ran it with all hat nozzels but it always had one relatively lean cylinder that limited the tune up. He decided to run one fuel line to the port on the lean cylinder and went testing. It looked weird but it worked like xxxx. The car went undefeated for a whole season. I believe he ended up running seven other port nozzels that were blanks to keep everyone guessing.

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Tuning Help
« Reply #18 on: August 15, 2017, 05:24:33 PM »
We will try to angle the hat nozzles this next race to see what we can see, do not want to change to ,much, still number one after four races, two to go
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Tuning Help
« Reply #19 on: September 12, 2017, 02:42:34 PM »
Just a follow up. we did tip the nozzles as suggested, and that helped a lot!
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: Tuning Help
« Reply #20 on: September 12, 2017, 02:48:07 PM »
Just a follow up. we did tip the nozzles as suggested, and that helped a lot!

Helps on my combo too Glenn.
Greg
El Dorado County, CA
www.meansracing.com