Author Topic: 4 Cyl. Nitro burner!  (Read 5696 times)

Offline Blind Mule

  • Full Member
  • ***
  • Posts: 117
    • View Profile

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: 4 Cyl. Nitro burner!
« Reply #1 on: February 12, 2013, 08:49:38 PM »
http://www.dragzine.com/news/video-bres-cackling-4-cylinder-3000-hp-nitro-burning-dragster/

 Sounds like a v8  :o

It absolutly sounds like a v8.

I know nothing about this engine
The 3.3L powerplant has a 4.125-inch bore and 3.750-inch stroke, and is paired with a 4:71 high-helix blower (making 48 lbs. of boost at 8,000 RPM), dual 7-amp magnetos, and a 28 GPM Hilborn fuel pump delivering nitro via five nozzles per cylinder, all creating over 3,000 horsepower.

When you watch the launch there is flame on both sides, like a V8?
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline denverflatheader

  • Sr. Member
  • ****
  • Posts: 333
    • View Profile
Re: 4 Cyl. Nitro burner!
« Reply #2 on: February 14, 2013, 06:29:55 AM »
I'd seen a red vw powered on the cable show Pass Time maybe last year.  If I remember it ran in the 6s for 1/4 mile.   I'm not sure if it was the same red as in this article...... hard to believe there's two of those 4 cyl. out there.  That's bad little motor.