Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Josephslarm

Pages: [1]
1
Hey guys!
 
I've encountered a really annoying issue – there's a strong vibration at certain speeds, and it's clear the driveshaft is the culprit. It gets really bad at speeds like 80-90 km/h. Forum discussions suggest it's probably due to imbalance.
 
I'm trying to choose the best way to resolve this:
 
Remove the driveshaft and have it balanced with a machine. It appears to be the most reliable way, though it's a lot of hassle – removal, transport, waiting, and reinstalling.
Doing the balancing on the car itself. Some folks manage this with special equipment without removing the driveshaft.
 
Has anyone here dealt with a similar issue? How did you address the driveshaft vibration issue, which method did you go with, and why?
I want to buy a portable balancer Balanset-1A, like this for   Cardan Shaft Balancing  In this store  https://www.ebay.com/itm/395459557061
 
 
 
Are there any tips or things to watch out for? I'd really appreciate any advice and recommendations!

2
Hey guys!
 
I've run into a frustrating issue – there's a strong vibration at certain speeds, and it's clear the driveshaft is the culprit. It's especially bad at certain speeds, like around 80-90 km/h. From what I've read online, it's likely an imbalance problem.
 
I'm now figuring out the best solution?
 
Take the driveshaft off and have it balanced at a shop. This method is reliable but can be costly and time-consuming. I've read about balancing it without removing it. They do it on a lift without removing the shaft using some equipment.
 
Has anyone encountered a problem like this? How did you solve the driveshaft vibration problem, which method did you choose, and why?
I want to buy a portable balancer Balanset-1A, like this for   Drum Balancing  In this store  https://www.ebay.com/itm/395385856425
 
 
 
Are there any tips or things to watch out for? I would greatly appreciate any advice and recommendations!

3
Hey everyone!
 
I'm dealing with a frustrating problem – there's a strong vibration at certain speeds, and I've figured out it's coming from the driveshaft. It's especially bad at certain speeds, like around 80-90 km/h. From what I've read online, it's likely an imbalance problem.
 
I'm trying to choose the best way to resolve this:
 
Remove it and take it to a balancing machine. It might be the best solution, but it's inconvenient and pricey. I've also heard it can be balanced right on the car. They do it on a lift without removing the shaft using some equipment.
 
Has anyone  balanced their driveshaft  this way? Please share your experiences and results. I appreciate any advice in advance!

Pages: [1]