Messages

1

Front Engine Dragsters / Re: New Guy love FED but clueless and scaried

« on: March 05, 2014, 06:05:33 AM »

Once you do it you will never regret it!!!!! I ran a 9.90 door car for years and took the plundge 2 years ago. Built mine from a kit with the help of a few good people who ran the FED's  back in the day. What a differance it was!!!!  I have always wanted a front engine dragster since I was a little kid building the models of them. I was Scared at first but after a couple of passes .... it's a blast!!!!!!! So good luck and follow your dreams!!!!

2

Spud Miller's Cave / Re: Nitro Question.....

« on: March 03, 2014, 04:27:34 AM »

Thanks Spud... I'm already setup as a user on your website....  I agreee that I need to get the alky setup right first before starting to add the juice. Does this setup for alky sound close. 356 cu in small block, 0 pump flowing 3.50 gpm@ 4000 rpm , 14as X 3-1/2" long, 75 main pill, high speed set @ 65psi and a 94 pill. Let me know!!!!!!!

3

Spud Miller's Cave / Re: Nitro Question.....

« on: March 01, 2014, 07:01:30 AM »

Hey Jon.... do my front wheels look familiar? I bought them from you a coulpe of years ago and they are fantastic!!!!! Thanks for the info. I currently run a 0 pump so my pressure might not be as high as yours on alcohol. What was your best time with that alcohol set up? I think I'll be in the ballpark starting off with my set for pure alcohol. High speed has a 94 pill and will crack open at 65 psi. Does that pressure sound okay? Let me know.   

4

Spud Miller's Cave / Re: Nitro Question.....

« on: February 28, 2014, 06:15:48 AM »

Was thinking about the 2-step also Hotrod 316.... might have to lower the launch rpm a little to... will look for your first pass and Thanks for the info....

5

Spud Miller's Cave / Nitro Question.....

« on: February 28, 2014, 02:08:42 AM »

Going to run 30% Nitro later in the year..... Once I fine tune my Hilborn Injection Stack set up (Changing from 16as to 14as nozzles and setting up High Speed Bypass), do I need to put more fuel to the motor when I put 30% Nitro mix in ( with 14 as nozzles, I'm planning to start out with a 75 main jet) and what about the timing (currntly running 38 degrees) and what about the high speed???
Thanks for the help!!!!!