1
Wanted to sell / Re: 392 Hemi's (X2), Lenco 2 Spd with Reverse, Halibrand Dragster Spindle Mount Rims
« on: September 12, 2017, 07:54:14 PM »
Got carried away on the zero's 
FEDs Forever!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Wanted to sell / 392 Hemi's (X2), Halibrand Dragster Spindle Mount Rims
« on: September 11, 2017, 02:29:50 PM »
For Sale:
1) Two 1958 "392 Hemi's" . Motors are apart. Price includes: Block, Heads, Rockers & Crank. Other pieces for sale as well.... $2,000 each, FIRM....
2) Hedman Dragster 2" tubes for 392 hemi, zoomie hedders, silver ceramic coated, new $1,100 US... Selling for $700...
3) One piece Fiberglass race 'T' bucket with turtle deck (trunk), weights 30 lbs, $600....
4) 3 pairs of 392 bare heads, $175 per pair....
5) Milodon 392 hemi gear drive, new, $300....
6) Chrome moly wheelie bars, powder coated flat black, with adjuster coil springs, new never used, $375.....
7) Enderle Barn Door Blower Injector, with scoop and stainless steel lines, highly polished mirror like, $1,200 FIRM....
Two sets of Halibrand, magnesium spindle mount, funny car rims, mint condition, $1,200 pair....
9) Accel Pro hemi race wires, $100 pair....
10) Moon 4 quart puke tank with breather and cast brackets, new, $300
11) 392 hemi 'nitro / fuel' roller cam, roller rockers and springs, new, $600...
Contact : neilcandy@xplornet.ca or call # (613) 353-7572
Parts located 3 hours north of Syracuse NY...
1) Two 1958 "392 Hemi's" . Motors are apart. Price includes: Block, Heads, Rockers & Crank. Other pieces for sale as well.... $2,000 each, FIRM....
2) Hedman Dragster 2" tubes for 392 hemi, zoomie hedders, silver ceramic coated, new $1,100 US... Selling for $700...
3) One piece Fiberglass race 'T' bucket with turtle deck (trunk), weights 30 lbs, $600....
4) 3 pairs of 392 bare heads, $175 per pair....
5) Milodon 392 hemi gear drive, new, $300....
6) Chrome moly wheelie bars, powder coated flat black, with adjuster coil springs, new never used, $375.....
7) Enderle Barn Door Blower Injector, with scoop and stainless steel lines, highly polished mirror like, $1,200 FIRM....
Two sets of Halibrand, magnesium spindle mount, funny car rims, mint condition, $1,200 pair....9) Accel Pro hemi race wires, $100 pair....
10) Moon 4 quart puke tank with breather and cast brackets, new, $300
11) 392 hemi 'nitro / fuel' roller cam, roller rockers and springs, new, $600...
Contact : neilcandy@xplornet.ca or call # (613) 353-7572
Parts located 3 hours north of Syracuse NY...
3
Wanted to sell / Donovan Hemi Stands, Rockers, etc
« on: March 24, 2014, 04:54:31 PM »
Chrysler Hemi, complete set of Donovan Stands, Rockers, Solid Shafts, etc.
Pictures show it all on a Nitro Burning 392.
$1,300.00
Thanks, Neil...
Pictures show it all on a Nitro Burning 392.
$1,300.00
Thanks, Neil...
4
Gassers / '40 Willys P/U Box Measurements
« on: March 01, 2014, 06:32:07 AM »
Hello : I will be starting my '40 Willys Truck build this summer and I am looking for a few general measurments for the box which I will be building. What is the general heigth of the box, assuming the bottom of the box does not extend past the bottom of the frame rail ? Second, what angle where the gun rails bent and the width of the gun rail ?
I was thinking 21" tall box, including the gun rails would look just fine ! The motor will be a 409 !
Thanks...
I was thinking 21" tall box, including the gun rails would look just fine ! The motor will be a 409 !
Thanks...
5
Wanted to buy / 392 Magneto For AA/FA
« on: February 28, 2014, 10:51:04 PM »
Wanted : 392 Magneto for a AA/FA...
Thx....
Thx....
6
Wanted to buy / Re: LENCO CS2 Rear Mount Shifter
« on: March 21, 2013, 10:33:13 AM »
Hello Glenn : Keith doesn't have any shifters at the moment, however; who is "Matt" ?
Thx, Neil...
Thx, Neil...
7
Wanted to buy / Re: Lenco OR B&J 2 Speed With Reverse
« on: March 20, 2013, 11:21:19 AM »
Perfect... Thx for the tip as I jsut received my Lenco....
8
Wanted to buy / Re: front cover and blower manifld for 303 olds
« on: March 20, 2013, 11:20:33 AM »
Tony at Ross Racing Engines may have what you are looking for.... He is an Olds Guru....
9
Wanted to buy / Re: fiat body
« on: March 20, 2013, 11:18:08 AM »
Fiberglass Race Weight Body ?
Here is agreat guy in Ohio... MyBonneville Belly Tank, Surfer Scoops and "T" Body was made by Scott...
Tell him I sent you if you are interested....
Here is agreat guy in Ohio... MyBonneville Belly Tank, Surfer Scoops and "T" Body was made by Scott...
Tell him I sent you if you are interested....
10
Wanted to buy / LENCO CS2 Rear Mount Shifter
« on: March 20, 2013, 11:13:56 AM »
Wondering who may have a rear mounted manual shifter for a CS2, 2 speed with reverser ?
Thx, Neil...
Thx, Neil...
11
Roo Man's Room / Re: AA/FA : Fuel Altered Axle With Coil Overs
« on: March 20, 2013, 11:11:57 AM »
Hello Keith : You there Buddy ?
Just wondering what your suggestion may be on the alxe and front coilovers?
Going to the Round-Up in a couple of weeks ?
Just wondering what your suggestion may be on the alxe and front coilovers?
Going to the Round-Up in a couple of weeks ?
12
Roo Man's Room / AA/FA : Fuel Altered Axle With Coil Overs
« on: February 14, 2013, 05:22:26 AM »
What coil overs (Shock Length & Spring Rate) are the AA/FA altereds running on their front axles ? I understand the front ends are near solid, with very limited suspension. THx....
13
Wanted to buy / Re: WANTED: FED Front Spoke Wheels
« on: February 11, 2013, 06:36:52 PM »
A buddy of mine will be heading down to Wellington TX then Austin the first week in April for the Lone Star Round-Up. If you are interested, he has a nice pair with Chev spindles, tires & bearings. Give Jeff at call at (519) 942-8157... I know he will be selling his wires, however; they are in nice shape and I noticed you are located in Texas..... Just a thought...
14
Roo Man's Room / Lenco CS1 or CS2 Transmission For A "AA/FA"
« on: February 08, 2013, 06:02:17 AM »
2 Spd, 19% underdriven CS2 Lenco for a AA/FA ? Or should I go for the CS1 ?
15
Altereds / Re: A few pics of my mentors ride from the 60'S
« on: February 05, 2013, 07:43:04 PM »
Looks as if most Nitro tanks back then were around 5 Gal ?
I call the Halibrand rims on the front of the Winged Express, "Funny Car Rims", however; what were these rims called ? I am not referring to the 12 spoke rims they ran for a short period of time.....
Kool 2nd Dad !!!
I call the Halibrand rims on the front of the Winged Express, "Funny Car Rims", however; what were these rims called ? I am not referring to the 12 spoke rims they ran for a short period of time.....
Kool 2nd Dad !!!
Pages: [1] 2