FrontEngineDragsters.Org Forum

Drag Racing Discussions => Front Engine Dragsters => Topic started by: Oldschool on May 05, 2014, 04:07:54 PM

Title: Header Question
Post by: Oldschool on May 05, 2014, 04:07:54 PM

 I have Brodix cnc 227 SBC heads with standard exhaust bolt pattern. The car I bought has zoomie headers with spread port pattern. I was told by a major header manufacturer that they can make adapter from a 6 bolt to a 7 bolt,but the center ports will not match up right.
Can someone chime in ?
I guess if I can not use will have to sell these and buy a set with standard.

Title: Re: Header Question
Post by: dreracecar on May 05, 2014, 05:55:02 PM

It will work just fine with the adapters.  Get a gasket and lay it over the ports.  Built many a system like that on cars that run 7.0

Title: Re: Header Question
Post by: Oldschool on May 07, 2014, 12:40:26 PM

Really appreciate the info. you sent.

Title: Re: Header Question
Post by: gregm784 on June 02, 2014, 03:48:56 PM

Bought my adapters from:

http://www.nimac.biz/5.htm

Nice quality