FrontEngineDragsters.Org Forum

Technical => Matt Shaff's Engine Shop => Topic started by: Oldschool on May 05, 2014, 03:49:50 PM

Title: Header Question
Post by: Oldschool on May 05, 2014, 03:49:50 PM

 I have Brodix cnc 227 SBC heads with standard exhaust bolt pattern. The car I bought has zoomie headers with spread port pattern. I was told by a major header manufacturer that they can make adapter from a 6 bolt to a 7 bolt,but the center ports will not match up right.
Can someone chime in ?

Title: Re: Header Question
Post by: wideopen231 on May 05, 2014, 04:39:14 PM

I do not see how w/o modifing zoomies. Zoomies are fairly cheap I would either buy another set of build a set. I have built some for guys with bbc,sbc no big deal either and in all fairness Ted's fabrication also sales them and he too is member.

Title: Re: Header Question
Post by: Oldschool on May 05, 2014, 06:18:34 PM

Thanks for you reply will check out.