FrontEngineDragsters.Org Forum

Drag Racing Discussions => Front Engine Dragsters => Topic started by: wideopen231 on September 22, 2013, 11:47:57 AM

Title: throttle and shutoff cables
Post by: wideopen231 on September 22, 2013, 11:47:57 AM

Looking for good source for cables for new FED.Normally run Morse but thinking if cheaper or maybe lighter available I'm open to checking into them. Needing throttle,shifter  fuel shut off and I have chute cables covered.

Title: Re: throttle and shutoff cables
Post by: dwrfab on September 22, 2013, 03:08:45 PM

Check Wicks air craft supply . Lots of adaptable parts.
 Don Ross

Title: Re: throttle and shutoff cables
Post by: rooman on September 23, 2013, 04:27:03 PM

The red jacket Morse are too stiff and too heavy. I source mine from either McKinney or direct from Control Cables Inc in California. These are the grey spiral wound sheath deals that you can tie in knots and still have them operate smoothly. Good Vibrations in CA also stocks them as they are right up the street from CCI.

mckinneycorp.com

controlcables.com

dragparts.com

Roo

Title: Re: throttle and shutoff cables
Post by: GlennLever on September 24, 2013, 09:21:37 AM

X2 Control Cables Inc in California