FrontEngineDragsters.Org Forum
Drag Racing Discussions => Altereds => Topic started by: draper on April 13, 2015, 07:24:54 AM
-
My name is Glen and I am from melbourne Australia, here are a few pic's of my unfinshed ride. It's a 105 inch moly tube Topolino altered powered by a blown / injected 392 hemi, powerglide, floater 9 inch rear. Started project with a rolling 125 inch mark Williams chassis ( was injected small block 9 sec car ). All mods / fabrication done by myself in home shed, project is about 12 months away from testing - should be mid 7 sec ride if all goes well, hope you like. Glen
-
Looking good
-
Welcome Glen.
good looking hot rod there.
-
Chassie tune advice----Equal pressure in rear tires, jack up the front at the torsion and make sure the left front spindle is at least 1/4" lower than the right.
-
Very Nice Piece.
-
It looks wild & handful: the altered epitome!
Congrats and welcome.
-
Welcome Glen and really liking your hot rod ;)
-
Nice car Mate! Hopeing to get a few laps in at Mildura next year - see you there ?
-
With thanks. Plenty of advice!
click for info https://milesnice.com/articles/tbdl-l-mlt-ljnby-fy-wdybwr-lywm
view https://clemsonrf.com/guides/weongyeog-deiteo-ibryeog-seogi-jibeseo-jageob
-
Truly a good deal of useful material!
find out here https://brainzillakids.net/soft/maikeuro-sopeuteu-yeongu-opeun-geugeoseun-mueosimyeo-geugeoseul-sayonghaneun-bangbeob
find out https://luclaeven.com/blog/kyfy-l-thwr-l-mfth-kwyn-byz-lkhs