FrontEngineDragsters.Org Forum
Drag Racing Discussions => Front Engine Dragsters => Topic started by: Dolmetsch on August 02, 2014, 06:47:42 AM
-
I shot this video at Picton Airfield. It is out of focus because I inadvertently had it on close up. Unfortunately it appears to be the only video of Mikes shakedown run that day so I uploaded it anyway. You can hear the early hemi a 331 nicely. Mike wanted it as it was in the 60s so even the cam is period correct and very mild by todays standards. Despite that after his shakedown run Mike Put experienced FED pilot Pat Doornbos in the car. On Pat's final pass of the day he turned the old hemi loose and told me it hit 6100rpm in the eyes. So if you do the math 355 rear gears , 28 inch tire and 4 % converter slip that is pretty impressive. Again I apologise for messing up the video. BTW the other car is a Small block chev powered gasser and this was its very first pass.
don
<div style="width:480px;text-align:right;"><embed width="480" height="360" src="http://pic2.pbsrc.com/flash/rss_slideshow.swf" flashvars="rssFeed=http%3A%2F%2Ffeed1236.photobucket.com%2Falbums%2Fff449%2FDolmetsch%2Ffeed.rss" type="application/x-shockwave-flash" wmode="transparent" /><a href="javascript:void(0);" target="_blank"><img src="http://pic.photobucket.com/share/icons/embed/btn_geturs.gif" style="border:none;" /></a><a href="http://s1236.photobucket.com/user/Dolmetsch/library/" target="_blank"><img src="http://pic.photobucket.com/share/icons/embed/btn_viewall.gif" style="border:none;" alt="Dolmetsch's album on Photobucket" /></a></div>
-
Here it is standing still.
-
Looks good Don, any side shots,, Tim Jones
-
yup
don
-
Thanks Don, Your buddies car is pretty cool, That wood pile in the background reminds me of living along the Platte River and heating with wood, Makes my back sore just looking at it,, Tim Jones
-
Mike currently works installing those outdoor wood furnaces and has one hisself. I quit the wood thing just last year (sore back!;>)
Mike recently scored a running flathead Ford so I don't know what he will build with it. He also has a 41 Willys with a 331 hemi and a four speed.
don
-
looks like the 2-1bbl marine intake manifold???
-
Yes it is. Back in 2000 I did a lot of development work on the engine in what is now the FourAmerica 35 Chev Vintage stock car.(Runs in vintage stock car races in and around Daytona) During the development of that motor package I had occasion to have the head on my flow bench for several tests. Head flow when done was really quite good rivaling if not exceeding the popular 441 Chevy V8 head. During testing I also did a few flow bench runs with the intake and single Rochestor carb installed. That carb was production 292 GMC truck . We had removed the cross bar and made some mods in the horn but essentially it was as produced. I noticed that at wide open the carb did not even present any restriction and so knew that and what the approx. max flow capabilities of the carb were when mounted on the manifold I realized when I saw the marine 2 single available that two of those Rochestor carbs would easily handle the requirements of Mike's vintage style 331 hemi. From its current performance it would appear that was a valid conclusion as it is already performing at what I figured would be best possible eventual result.
don