« previous next »
Pages: [1]   Go Down

Author Topic: a few questions  (Read 5126 times)

Offline L79_Acadian

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
  • Your Engine: Just a little 355 Chevy
  • Your Track: none
  • Your Vehicle: 2013,160" CenPen Speed Shop (Worm)
a few questions
« on: May 27, 2014, 05:11:07 AM »
Hi I need some help here. I have a stack injected small block chev, on methanol.
Now I would like to know, what weight oil I should run and what plugs?
The plugs need to be gasket seat,3/4" reach nonresistor, for a mag.
 Thanks guys
     Roger
Logged

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: a few questions
« Reply #1 on: May 27, 2014, 06:01:48 AM »
Roger:
 We need to know more information on the engine.
Do you know what the bearing clearances are and how much compression the engine has?
I see you posted this in Matts engine section.

Thanks: Matt
« Last Edit: May 27, 2014, 06:03:30 AM by Frontenginedragsters »
Logged
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/

Offline L79_Acadian

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
  • Your Engine: Just a little 355 Chevy
  • Your Track: none
  • Your Vehicle: 2013,160" CenPen Speed Shop (Worm)
Re: a few questions
« Reply #2 on: May 27, 2014, 07:37:26 AM »
Hi, the comptession is approx. 13:1 and the bearing clearence standard bearing clearences
Logged

dreracecar

  • Guest
Re: a few questions
« Reply #3 on: May 27, 2014, 08:12:54 AM »
My opinion

  If you are running alcohol then use Brad Penn oil, weight is a preference
  As for plugs for right now to start just a standard set of NGK b9es, you dont need anything trick or high dollar. Real easy to read since they are cad/iridite plated--dont go beond three threads of burned off plating- 4 threads is too close
Logged

Offline L79_Acadian

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
  • Your Engine: Just a little 355 Chevy
  • Your Track: none
  • Your Vehicle: 2013,160" CenPen Speed Shop (Worm)
Re: a few questions
« Reply #4 on: May 28, 2014, 06:51:39 AM »
Thanks guys,got the oil and the.plugs yestetday. One step closer to the track
Logged
Pages: [1]   Go Up
« previous next »