Technical > Roo Man's Room

aluminum lower steering arms A-Arm setup

(1/2) > >>

wideopen231:
 Thinking about going with aluminum lower steering arms.Wondering if anyone on site is running them.I know Parks sales them as does M-W. Figure if they where as questionable as some think(other sites most RED folks) they would not sale them. I have moly one for the upper arm and its pocket milled but still heavier and figure it gets more abuse. Yea I know Parks sales a titaniuym one also,later on maybe.

dreracecar:
Whose spindles??? every manuf. uses a dif bolt pattern and some machine a cross to take the mateing shear load along with the bolts.

I have made alu arms for NHRA fuel cars before--- no issues , just use 7075- t6

wideopen231:
Not sure whos spindle I got them second hand. I will be getting new bushing shortly maybe something needed to get correct will tell me who's. Pattern not issue already made a set plus a moly top that is pocket milled some.

dreracecar:
can you post a pic???

masracingtd1167:
Chris I use them on mine and have had no issues . I also have aluminum spindles .

Navigation

[0] Message Index

[#] Next page