Author Topic: Oil Pan  (Read 7699 times)

Offline Oldschool

  • Full Member
  • ***
  • Posts: 122
    • View Profile
  • Your Best Time: 8.42 in a BB Chevy Altered 9.28 in my Vega
  • Your Engine: 434 Scott Shafiroff Racing Engine
  • Your Track: US 36 , Mo Kan and Heartland Park Topeka
  • Your Vehicle: 173" Front Engine Dragster
Oil Pan
« on: April 26, 2014, 04:28:10 PM »
Does anybody have an oil pan for SBC that are looking to get rid of. My oil pan from my door car might not cut it. What would be a good oil pan ?
« Last Edit: April 26, 2014, 05:48:53 PM by Oldschool »
It is not the years in your life
But the life in your years

Offline spookie

  • Jr. Member
  • **
  • Posts: 61
    • View Profile
  • Your Best Time: 8.92 1/4 5.59 1/8
  • Your Track: Quarter Aces drag-o-way
  • Your Vehicle: F.E.D.
Re: Oil Pan
« Reply #1 on: April 27, 2014, 04:34:24 AM »
Check out Milodon they make a full sump pan for sbc. mine works for oil control. part #31145, this may be good number.

Offline Oldschool

  • Full Member
  • ***
  • Posts: 122
    • View Profile
  • Your Best Time: 8.42 in a BB Chevy Altered 9.28 in my Vega
  • Your Engine: 434 Scott Shafiroff Racing Engine
  • Your Track: US 36 , Mo Kan and Heartland Park Topeka
  • Your Vehicle: 173" Front Engine Dragster
Re: Oil Pan
« Reply #2 on: April 27, 2014, 09:42:04 AM »
Thanks
It is not the years in your life
But the life in your years

Offline George

  • Hero Member
  • *****
  • Posts: 515
    • View Profile
  • Your Vehicle: 1964 Mercury Comet Super Stock/ M automatic
  • General Location: Midwest USA
Re: Oil Pan
« Reply #3 on: April 28, 2014, 03:43:05 AM »
That is the pan I use.

Offline Oldschool

  • Full Member
  • ***
  • Posts: 122
    • View Profile
  • Your Best Time: 8.42 in a BB Chevy Altered 9.28 in my Vega
  • Your Engine: 434 Scott Shafiroff Racing Engine
  • Your Track: US 36 , Mo Kan and Heartland Park Topeka
  • Your Vehicle: 173" Front Engine Dragster
Re: Oil Pan
« Reply #4 on: April 28, 2014, 05:16:21 PM »


This is what I have on my engine now. I guess the reason not to run is possible ground clearance ? Or is it something you can run a pan with a rear sump ?
It is not the years in your life
But the life in your years

Offline jimc

  • Newbie
  • *
  • Posts: 42
  • Southern Slingshots Northern Race Coordinator
    • View Profile
  • Your Best Time: 7.93
  • Your Engine: 383 Tom Martino
  • Your Track: Englishtown, Atco
  • Your Vehicle: '70 Ed Mabry 186"
Re: Oil Pan
« Reply #5 on: May 07, 2014, 07:57:57 PM »
You might be ok with that pan, best is to put the engine in and see what you need.  A lot of pans have a rear height of around 8 1/4" rear sump depth or close to that. For instance I have two motors one with a Moroso alum race pan and the other a  Milodon steel street/race pan in my Mabry chassis and have plenty of clearance. Ya jut gotta check and see what you need.
Jim

Offline Oldschool

  • Full Member
  • ***
  • Posts: 122
    • View Profile
  • Your Best Time: 8.42 in a BB Chevy Altered 9.28 in my Vega
  • Your Engine: 434 Scott Shafiroff Racing Engine
  • Your Track: US 36 , Mo Kan and Heartland Park Topeka
  • Your Vehicle: 173" Front Engine Dragster
Re: Oil Pan
« Reply #6 on: May 08, 2014, 05:03:08 PM »
I put the motor in and perfect,so that saved me some money for other things.
It is not the years in your life
But the life in your years

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: Oil Pan
« Reply #7 on: June 02, 2014, 03:45:00 PM »
I have a dragster pan for a SBC that i'm not using.  Will sell cheap.  8.25" sump i think...Made by Dooley (boat pan and dragster pan guys from Socal
Greg
El Dorado County, CA
www.meansracing.com