FEDs Forever!
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Calendar
Login
Register
FrontEngineDragsters.Org Forum
»
Technical
»
Matt Shaff's Engine Shop
(Moderator:
Clint Dobbs
) »
TCI tranny shield
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: TCI tranny shield (Read 4761 times)
spitzerscott
Full Member
Posts: 116
Your Best Time: 5.73@118.80
Your Engine: 336 Small Block Chevy
Your Track: Osceola IN, Top Eliminator runs 1/8 mile
Your Vehicle: Spitzer225 RED, Alcohol SBC
General Location: Northern Indiana
TCI tranny shield
«
on:
April 27, 2014, 12:22:50 PM »
Have any of you guys had to modify the lower bracket of a Powerglide shield? It looks like mine will hit my cable bracket before I get back to the bolt hole. Rule book does not say lower section cannot be modified, top section has cert. sticker. In a Spitzer 225 RED. Super Pro bracket car.
«
Last Edit: April 27, 2014, 12:24:23 PM by spitzerscott
»
Logged
dreracecar
Guest
Re: TCI tranny shield
«
Reply #1 on:
April 27, 2014, 01:48:54 PM »
The lower straps can be modyfied to fit without looseing cert. do a nice job. just remove enough material to clear obstruction.
Logged
spitzerscott
Full Member
Posts: 116
Your Best Time: 5.73@118.80
Your Engine: 336 Small Block Chevy
Your Track: Osceola IN, Top Eliminator runs 1/8 mile
Your Vehicle: Spitzer225 RED, Alcohol SBC
General Location: Northern Indiana
Re: TCI tranny shield
«
Reply #2 on:
April 29, 2014, 02:06:18 PM »
Thanks DRE it won't take much.
Logged
masracingtd1167
Hero Member
Posts: 1110
bill masiello Shelton Ct.
Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
Your Engine: 394 chevy
Your Track: Lebanon Valley Dragway
Your Vehicle: 2003 Neil and Parks
Re: TCI tranny shield
«
Reply #3 on:
May 01, 2014, 12:47:12 PM »
Scott Most tech guy's just want to see the tag .
Logged
spitzerscott
Full Member
Posts: 116
Your Best Time: 5.73@118.80
Your Engine: 336 Small Block Chevy
Your Track: Osceola IN, Top Eliminator runs 1/8 mile
Your Vehicle: Spitzer225 RED, Alcohol SBC
General Location: Northern Indiana
Re: TCI tranny shield
«
Reply #4 on:
May 01, 2014, 02:14:39 PM »
Thanks you two, got it done, you really have to look hard to tell which bracket goes thru the other. With bodywork on car you won't be able to see it at all. Didn't take much, I don't think strength or safety was compromised.
Logged
dreracecar
Guest
Re: TCI tranny shield
«
Reply #5 on:
May 01, 2014, 10:35:51 PM »
99%of the time if you run thru tech with your card all filled our (numbers,dates,specs) tech will not have to go looking for things
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
FrontEngineDragsters.Org Forum
»
Technical
»
Matt Shaff's Engine Shop
(Moderator:
Clint Dobbs
) »
TCI tranny shield