Author Topic: 183" build for customer  (Read 17951 times)

Offline retroboy

  • Full Member
  • ***
  • Posts: 221
    • View Profile
  • Your Track: Whyalla
  • Your Vehicle: FED
Re: 183" build for customer
« Reply #15 on: July 18, 2018, 06:25:13 AM »
Nice car mate. I was in Gisborn in January man there is much to do there. Where is his nearest track?

Offline FredsSpeedShop

  • Newbie
  • *
  • Posts: 6
    • View Profile
  • Your Engine: Ford 440 FE
  • Your Track: MMP
  • Your Vehicle: FED project
Re: 183" build for customer
« Reply #16 on: August 03, 2018, 04:12:12 AM »
Thanks. The two main tracks are both about 500 kms from here, north to IHRA Meremere and south to NZDRA Masterton Motorplex. I am currently building another tail section, this will be the third version. Trying to get it right.

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: 183" build for customer
« Reply #17 on: August 03, 2018, 06:57:42 AM »
Looks really swoopy. Will the chute pack be contained inside?

Offline FredsSpeedShop

  • Newbie
  • *
  • Posts: 6
    • View Profile
  • Your Engine: Ford 440 FE
  • Your Track: MMP
  • Your Vehicle: FED project
Re: 183" build for customer
« Reply #18 on: August 06, 2018, 01:58:49 AM »
The chute fits just inside. This is a picture of the last version. Kind of boxy

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: 183" build for customer
« Reply #19 on: August 06, 2018, 09:51:24 AM »
You must have awfully high standards - the last version looks nice to me.

Offline Rat

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
  • Your Best Time: 8.585 @ 154.55
  • Your Engine: Stack Injected All Iron 392 Chrysler Hemi
  • Your Track: Willowbank Raceway, Queensland, Australia
  • Your Vehicle: Colthup Bros FED
  • General Location: Australia - East Coast
Re: 183" build for customer
« Reply #20 on: December 26, 2018, 11:46:23 PM »
How are you progressing. Great build 8)

Offline FredsSpeedShop

  • Newbie
  • *
  • Posts: 6
    • View Profile
  • Your Engine: Ford 440 FE
  • Your Track: MMP
  • Your Vehicle: FED project
Re: 183" build for customer
« Reply #21 on: January 06, 2019, 01:42:51 AM »
Happy new year to all.
Progress has been ok. The car has a few runs on it now and everything has been working well. It goes straight, and, with the 360 SBC, has done 8.65 at 153. At the moment we are fitting the Ford FE engine.
« Last Edit: January 06, 2019, 01:58:44 AM by FredsSpeedShop »

Offline Kirk

  • Newbie
  • *
  • Posts: 1
    • View Profile
  • Your Best Time: None
  • Your Engine: Ford FE
  • Your Track: Martin
  • Your Vehicle: None
  • General Location: Michigan
Re: 183" build for customer
« Reply #22 on: February 04, 2019, 09:07:29 AM »
WOW great looking dragster...….what are the details on the FE?