Social > Your Builds / Photo Gallery

183" build for customer

(1/5) > >>

chassisman nz:
Here's some shots take last year of a customers project,Wayne is his name,hails from Gisborne here in New Zealand,(6 hour drive from my shop),based on a Dave Tuttle design with some of Waynes changes,the car is back for finishing,(steering,new front axle,chute mount,etc then back to Wayne for tinwork,will post more as progress continues,
Terry

dreracecar:
Nice,
The only thing that wont fly here in the States is that the rear end mounting plates must be welded not only to the uprite, but to the upper and lower framerails also, welding to the K-member tubes does not accomplish this. May pass or may not pass by your cert guy

Nightmare AA/FA:
Looks like you have a lot of projects in your shop.

GlennLever:
Some pretty welds.

chassisman nz:
'My work here is done' the rolling frame is now finished,(inc mods to rear uprights :))Wayne is travelling from Gisborne on Monday,6 hour drive,to take home & build body work,here's some shots taken in the 'departure' lounge 8),
Cheers Terry

Navigation

[0] Message Index

[#] Next page