Author Topic: Good Oil Pan  (Read 3488 times)

Offline Oldschool

  • Full Member
  • ***
  • Posts: 122
    • View Profile
  • Your Best Time: 8.42 in a BB Chevy Altered 9.28 in my Vega
  • Your Engine: 434 Scott Shafiroff Racing Engine
  • Your Track: US 36 , Mo Kan and Heartland Park Topeka
  • Your Vehicle: 173" Front Engine Dragster
Good Oil Pan
« on: April 26, 2014, 05:51:57 PM »
What would be a good oil pan for my FED with a carbureted 434 SBC ?
It is not the years in your life
But the life in your years

dreracecar

  • Guest
Re: Good Oil Pan
« Reply #1 on: April 27, 2014, 02:01:30 PM »
Without spending a fortune --Milodon


Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: Good Oil Pan
« Reply #2 on: April 27, 2014, 05:08:28 PM »
A couple years ago I was finishing assembling my SBC 400 and ordered Moroso PN 21017. Got two really bad pieces in a row (bent rail corners, cracked welds, very wavy rails, etc). The instructions warns that 1/4" rocking is acceptable... Other than frustration, I was sad to see Moroso's quality going downhill like that.

So I got a Canton and it was a night and day difference. May tray Milodon next time.