« previous next »
Pages: [1]   Go Down

Author Topic: head neck restraints  (Read 6672 times)

Offline buickfed

  • Full Member
  • ***
  • Posts: 191
    • View Profile
head neck restraints
« on: March 30, 2014, 03:12:30 PM »
how many have one and what brand? my wife(er nurse) and I were discussing what to get. we looked at the nexgen rev video and she was totally against it even though it has good reviews. didn't like the helmet to device gap. I kind of agree with her.
opinions please.
Logged

Offline rooman

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: head neck restraints
« Reply #1 on: March 31, 2014, 04:42:03 AM »
I have a HANS Pro (all carbon) with the sliding tether upgrade and am very happy with it. I will say that it works best if you have the shoulder belt modification which narrows them down to 2" where they pass over the device as it allows the belts to sit totally inboard of the outer flange. As part of the sliding tether upgrade I also have the quick release d rings.

Roo
Logged
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1110
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: head neck restraints
« Reply #2 on: April 01, 2014, 12:21:12 PM »
I have the Simpson Pro Rage and like it a lot . The only think I don't like is I can't hook the tethers by my self .
Logged

Offline sc118c

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Jersey Junior Fuel
  • Your Track: ATCO Raceway, NJ
  • Your Vehicle: 2010 SW - 225" FED
Re: head neck restraints
« Reply #3 on: April 18, 2014, 12:44:52 PM »
I currently use a HANS device and have been using on for the past 6 years. I started using the HANS when driving my SC Dragster because I had two spinal fusions i my neck and the Ortho Surgeon said he would only let me drive if I used the HANS. The wife agreed. I never had any problems associated with using the HANS, it just take a little bit of getting use to. I found that with the FED, it is better to put the HANS and helmet on before I get into the car and then my pit guy helps me finish the belts over the shoulder. I have been usin the HANS in my FED since 2010 with no problem. I also have the NHRA mandated - Good-Guys rules ISP Helmet pads on the sides of the roll cage.
Logged

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: head neck restraints
« Reply #4 on: April 19, 2014, 12:02:48 AM »
I have the sport HANS device. Very happy with it.
Logged
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Quartermiler

  • Newbie
  • *
  • Posts: 21
    • View Profile
  • Your Best Time: 7.61 in the quarter 174.2 mph
  • Your Engine: 406 SBC on Alcohol
  • Your Track: Mostly Northern TX southern OK
  • Your Vehicle: 1965 Jim Davis Chassis
Re: head neck restraints
« Reply #5 on: April 21, 2014, 04:04:11 PM »
I use the HANS sport also, it causes no problems.
Logged

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Re: head neck restraints
« Reply #6 on: April 26, 2014, 07:00:23 PM »
Hans carbon fiber also no problems. Will be buying a new device soon and will be looking at the Simpson and Hans plus the hybrid styles.
Logged
Pages: [1]   Go Up
« previous next »