Author Topic: Green Monster  (Read 11057 times)

Offline BK

  • Sr. Member
  • ****
  • Posts: 310
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Green Monster
« on: March 15, 2014, 05:17:31 AM »
I think this car is really cool. I'm pretty sure it's a Rooman build. Does anyone know which it use's a clutch or converter?
I don't know how to get the video to open on this page. Maybe Glenn can fix it.


« Last Edit: March 16, 2014, 03:42:45 PM by GlennLever »

Offline rooman

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: Green Monster
« Reply #1 on: March 15, 2014, 05:37:13 AM »
All that I did on Tim's car was the body, seat and wings, the Dustman brothers (see the video that is linked in this one) built the roller. No clutch, just a step down drive to get the rpm's down and also to get the driveshaft low enough to line up with the rear end.

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: Green Monster
« Reply #2 on: March 15, 2014, 06:16:54 AM »
I'm lost... no clutch or torque converter?

Nice car, thanks for posting.

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Green Monster
« Reply #3 on: March 15, 2014, 06:22:40 AM »
I think this car is really cool. I'm pretty sure it's a Rooman build. Does anyone know which it use's a clutch or converter?
I don't know how to get the video to open on this page. Maybe Glenn can fix it.
http://www.youtube.com/watch?feature=player_detailpage&v=QrkGoIFJsx8

I tried, but cannot get the video player screen to work on this link.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

dreracecar

  • Guest
Re: Green Monster
« Reply #4 on: March 15, 2014, 08:36:15 AM »
Those jet engines will stall over thrust with just the wheel brakes, let go of the brakes and it will take off

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: Green Monster
« Reply #5 on: March 15, 2014, 08:45:07 AM »
Those jet engines will stall over thrust with just the wheel brakes, let go of the brakes and it will take off

Thanks Bruce, but in this case the jet engine is driving the rear axle. I have to assume there's a torque converter between engine and axle. Or an automatic transmission, including reverse gears.

dreracecar

  • Guest
Re: Green Monster
« Reply #6 on: March 15, 2014, 09:10:33 AM »
No , there are shaft driven jet turbines APO (auxilery power outputs)
How do you think jet helocopters transfer power to the rotors?

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: Green Monster
« Reply #7 on: March 15, 2014, 09:13:28 AM »
No , there are shaft driven jet turbines APO (auxilery power outputs)
How do you think jet helocopters transfer power to the rotors?

Now I know... Thanks Bruce!

Offline BK

  • Sr. Member
  • ****
  • Posts: 310
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Re: Green Monster
« Reply #8 on: March 15, 2014, 04:02:01 PM »
Sort of like a hot gas coupling instead of a fluid coupling? No torque multiplication?

Offline rooman

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: Green Monster
« Reply #9 on: March 16, 2014, 06:21:02 AM »
Still a shaft coupling but linked to the output end of the turbine which can be stalled like a torque converter.

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: Green Monster
« Reply #10 on: March 16, 2014, 09:10:25 AM »
How about the Reverse?

Offline rooman

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: Green Monster
« Reply #11 on: March 16, 2014, 09:39:24 AM »
It has a Lenco reverser

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: Green Monster
« Reply #12 on: March 16, 2014, 09:45:45 AM »
It has a Lenco reverser

Roo

Ohh.. now I know, thanks Roo!

Offline Tim Arfons

  • Newbie
  • *
  • Posts: 2
    • View Profile
  • Your Track: Quaker City
  • Your Vehicle: Turbine FED
Re: Green Monster
« Reply #13 on: March 23, 2014, 05:18:32 AM »
Actually SCS gearbox built the trans. From the engine to a drive line brake, then 1.75/1  2 gear reduction( changes direction and brings RPM down from 20,000) , SCS reverser, rear end 5.13 gears Moser 9" ford