Author Topic: Transmission Gear Ratio  (Read 4012 times)

Offline captndiet

  • Newbie
  • *
  • Posts: 35
    • View Profile
  • Your Track: Rogersville Missouri
  • Your Vehicle: Front Engine Dragster
Transmission Gear Ratio
« on: January 25, 2014, 03:43:45 PM »
Spud

I know you run a Powerglide, but if you were to run a Crowerglide and Lenco 2 speed, what ratio would you start with on your combo?

I have 1.31, 1.44 and 1.56 available to me.

And given those options, would you still run the 2.91 rear gear or.....?

Jeff

Offline Spud Miller

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 332
    • View Profile
    • Fuel Injection Ent., LLC
Re: Transmission Gear Ratio
« Reply #1 on: January 26, 2014, 09:01:50 AM »

 A 3.73 rear gear and that 1.31 low give the same final drive as my 2.91 and 1.69...but I don't think you'll need something like that off the line with a clutch like a converter requires. Also, down-track you'll have control of the load on the motor with your clutch - unlike a converter.

So, I'd recommend the 1.56 low and a 3.73.

Spud

Fuel Injection Enterprises, LLC
     Mechanical Injection
     Magnetos
     EFI Conversions