Author Topic: shaping lexan  (Read 4604 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
shaping lexan
« on: October 29, 2013, 09:59:12 PM »
Looking for best way to shape lexan.  making windscreen for new car and going for something real clost to modern fuel car windshield.Stretched out and layed way back. Going to need to shape corners to almost 90* radius maybe 80 or so.Cowl can be shaped to match.Have already doen it once but going to have to remove lots of material so thats not big deal.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline rooman

  • Moderator
  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: shaping lexan
« Reply #1 on: October 30, 2013, 05:12:12 AM »
Lexan (or any of the polycarb family) can be bent in a brake or slip rolled. The thinner stuff can also be bead rolled so there are plenty of options for shaping it.

KB
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: shaping lexan
« Reply #2 on: October 30, 2013, 05:45:57 PM »
going to test some old drops in roller we used for body work. Have pattern or think I do,if I dont side to move out more.

Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot