Author Topic: Belt drive for a Hilborn fuel pump  (Read 4407 times)

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Belt drive for a Hilborn fuel pump
« on: August 28, 2013, 08:33:18 AM »
I am looking for a belt drive assembly for a Hilborn fuel pump. The engine combo in the dragster is only temporary, but requires a belt drive for the pump.
I am hoping someone has a loaner or used drive to sell.
Let me know

John

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Belt drive for a Hilborn fuel pump
« Reply #1 on: August 28, 2013, 08:54:40 AM »
I am looking for a belt drive assembly for a Hilborn fuel pump. The engine combo in the dragster is only temporary, but requires a belt drive for the pump.
I am hoping someone has a loaner or used drive to sell.
Let me know

John

Is this what you are looking for? I have a used pump drive, not the part for the crankshaft, that I bought off e-bay for a backup. It is not in great condition, but would be good for mock up, not sure I would trust it for the track.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/