Technical > Roo Man's Room

9" coupler

(1/2) > >>

mfp-66:
Got a stock 9" center that I tried to fit a strange engineering coupler, but it must be shorter than a standard yoke (mine never came with one) so it won't reach the bearings or maybe even the front seal. Do I need some sort of spacer  or a different pinion support

Is there a guide how to set these up? Fancy having a go myself

masracingtd1167:
I think you are going to need an aftermarket pinion support . You can get one from Jeg's or Summit pretty cheap . If you have a dial indicator and some patience you can do it yourself .

mfp-66:
Any idea which pinion support as there are so many to choose from.

Already got the dial gauge

rooman:
Does the couple have any part numbers so that we can determine exactly what application it is for?

Roo

mfp-66:
Strange Engineering U3627 - Strange Driveshaft Couplers

Got it from summit

Navigation

[0] Message Index

[#] Next page