Author Topic: Aluminum rods and nitro (Read 5760 times)

msundstrom · « **on:** October 22, 2013, 03:54:33 PM »

Spud'
At what % should I be considering aluminum rods?
Thanks
Mark S

Spud Miller · « **Reply #1 on:** October 22, 2013, 05:29:00 PM »

I would say at 50% or higher they are a must. Quite a few customers are running steel H beam rods with 30% just fine.

msundstrom · « **Reply #2 on:** October 22, 2013, 09:11:05 PM »

Thanks

hotrod316 · « **Reply #3 on:** October 23, 2013, 05:45:22 AM »

why? thanks
steve m.

Spud Miller · « **Reply #4 on:** October 23, 2013, 09:00:11 AM »

Steel rods transfer every bit of the impact and shock loading into the bearings and crank. The shock loads are much greater running nitro and aluminum rods are generally accepted as helping to cushion this somewhat.

hotrod316 · « **Reply #5 on:** October 24, 2013, 06:11:41 AM »

thanks ! I have lots more thoughts

again, thanks for your time

Author Topic: Aluminum rods and nitro (Read 5760 times)

msundstrom

Aluminum rods and nitro

Spud Miller

Re: Aluminum rods and nitro

msundstrom

Re: Aluminum rods and nitro

hotrod316

Re: Aluminum rods and nitro

Spud Miller

Re: Aluminum rods and nitro

hotrod316

Re: Aluminum rods and nitro