Drag Racing Discussions > Front Engine Dragsters
What did you do on your Front Engine Dragster TODAY?
coupemerc:
I worked through my intake and exhaust rocker geometry, worked out my pushrod lengths, pretty much finalized my piston domes and trial fitted my injector. It's been a few long nights. I even managed to pick up a 1957 392 hemi for short money this weekend. Cheers to all the Veterans!!!!
Dolmetsch:
Did some welding on a chassis but spent most of the afternoon working on my tunnel ram. Opened up the exhaust flange to take a poke through header pipe. The header pipes will be welded to a 1/8 th steel rail , upper and lower that fits the attchment holes . This will allow me to tighten the headers so they wont leak.
Got two fitted but had enuf for the day.
Don
coupemerc:
--- Quote from: masracingtd1167 on May 26, 2013, 09:24:01 AM ---Finishing up my trans today
--- End quote ---
Bill...Are you going to Epping in a few weeks? Looks like your deal is coming along nicely.
rooman:
I went to Bowling Green over the weekend to crew on Mark Vaught's 7.0 car at the NDRL race. Too quick on both qualifiers as the track was killer and so was the air. Running a pair of 6.9 laps (second one at only 169 MPH) put Mark in the bottom half of the field and he drew Robbie Freels in round one. They were both late on the tree but Robbie was better and won with a 7.06 to Mark's 7.04.
I will try to post some pix when I get a chance.
Roo
GlennLever:
--- Quote from: rooman on May 27, 2013, 05:24:53 PM ---I went to Bowling Green over the weekend to crew on Mark Vaught's 7.0 car at the NDRL race. Too quick on both qualifiers as the track was killer and so was the air. Running a pair of 6.9 laps (second one at only 169 MPH) put Mark in the bottom half of the field and he drew Robbie Freels in round one. They were both late on the tree but Robbie was better and won with a 7.06 to Mark's 7.04.
I will try to post some pix when I get a chance.
Roo
--- End quote ---
Got any pictures of the thrash to swap engines in Steve's altered, or the carnage when rod # 4 let go?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version