Drag Racing Discussions > Front Engine Dragsters

specs for wing on FED

(1/6) > >>

wideopen231:
Anyone know of spec for wing on FED. I looked thru heritage series rules on NHRA site found nothing,does not mean I did not overlook it. Heck happens all the time with me. I know what I want.Cheaper air foil tubing would be great.Man 14 bucks a foot was what i use to pay though that was high.Found 2 site in mid 20's price wise.Thats about 140 per side.

   Want to build it mounted lower on chassis and leaned back some with very low attack angle. I did mock up with cheap tubing and it lokks bada-- IMO and since its my car that  overrides all others.If going to build I would rather make it legal if possible.

Van:
Rear wings are tabo on FED's  = side canards only. Front wing is limited as per rules.
 Van

wideopen231:
SO Van are you trying to talk me out of wing or into it?   Going against the grain(except in my wood projects) as pretty much always been my way. 8)

Van:
I don't have anything against a rear wing on a FED, just answered your question. I just built and installed one on my car, on the front. If you do a rear wing and want to run a heritage race, i would think that you could just remove it.
 Van

GlennLever:
X2, just set it up so the struts are pinned in and just remove the pins to remove the wing

Navigation

[0] Message Index

[#] Next page

Go to full version