Author Topic: New member 200" Supercat FED  (Read 33851 times)

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
New member 200" Supercat FED
« on: July 08, 2013, 11:16:50 AM »
Finally had a few minutes to stop and join this site. A quick bit on me I'm 45. I have been racing for over 30 years from door cars to top fuel. I own a restoration shop and have for too many years. A few years ago I had the opportunity to buy a Fastech 200" FED and so the faster bug finally bit me. My wife and I race as a team which has just made running our FED that much better.
We are an odd team in that I grew up racing Buicks and that has spilled over to the FED. We started the build and ran for a few years with an injected Buick Nailhead. Then a long winter and a blown fuel Nailhead ended up in the car.  This past week we put in our Buick 462 cast iron block to go have some fun. We are using a 4 port Hilborn and methanol for the fuel. We are waiting for a few last parts for our aluminum Buick 445cu.in. fuel engine to be finished. Because no one has done it we are giving it a shot.

Below are 3 shots of the evolution of the dragster we call the SUPERCAT

John
« Last Edit: July 08, 2013, 11:18:50 AM by Supercat »

Offline 296moon

  • Newbie
  • *
  • Posts: 8
    • View Profile
  • Your Track: santapod raceway uk
  • Your Vehicle: twinengined rail
Re: New member 200" Supercat FED
« Reply #1 on: July 08, 2013, 04:14:01 PM »
I like alot, Moon

Offline buickfed

  • Full Member
  • ***
  • Posts: 191
    • View Profile
Re: New member 200" Supercat FED
« Reply #2 on: July 08, 2013, 05:58:33 PM »
john,
I still say the nailhead belongs in an older chassis.  ;D ;D
john

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: New member 200" Supercat FED
« Reply #3 on: July 08, 2013, 07:46:56 PM »
I like it a lot, we have Buick, Pontiac, now we need a Olds!
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Paul New

  • Hero Member
  • *****
  • Posts: 743
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: New member 200" Supercat FED
« Reply #4 on: July 08, 2013, 09:03:29 PM »
john,
I still say the nailhead belongs in an older chassis.  ;D ;D
john

Very cool but yes it would look real bad ass in a 140" chassis!

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Re: New member 200" Supercat FED
« Reply #5 on: July 08, 2013, 09:26:09 PM »
John and Paul as of right now the injected Nailhead is in my wife's 1971 RED I'll post some shots of that at some point.
I do have a mid 60s  145" 3 bar FED with Mag body would that be better ;D for the Nailhead.
We also have a brand new 160" FED chassis on the rack.
 
The Supercat FED is going to run in top fuel as the first/current Buick in the class. I am motivated by the people that said it can't be done....I just smile and say "Thanks for the inspiration"

Thanks folks for the compliments on the car

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: New member 200" Supercat FED
« Reply #6 on: July 09, 2013, 03:16:49 PM »
John and Paul as of right now the injected Nailhead is in my wife's 1971 RED I'll post some shots of that at some point.
I do have a mid 60s  145" 3 bar FED with Mag body would that be better ;D for the Nailhead.
We also have a brand new 160" FED chassis on the rack.
 
The Supercat FED is going to run in top fuel as the first/current Buick in the class. I am motivated by the people that said it can't be done....I just smile and say "Thanks for the inspiration"

Thanks folks for the compliments on the car

Supercat, not kidding, you seem like a well prepared man. Nice car.

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Re: New member 200" Supercat FED
« Reply #7 on: July 09, 2013, 09:14:00 PM »
Ricardo thanks on the car. We like to be prepared it's a long drive to the tracks from here ;D

I will start building the Zoomies this weekend for the engine that is in the car now(last picture). I was going to use the headers but it just doesn't look right.

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: New member 200" Supercat FED
« Reply #8 on: July 10, 2013, 04:20:51 PM »
"...I will start building the Zoomies this weekend for the engine that is in the car now (last picture). I was going to use the headers but it just doesn't look right..."

Supercat, I like your style!

Offline buickfed

  • Full Member
  • ***
  • Posts: 191
    • View Profile
Re: New member 200" Supercat FED
« Reply #9 on: July 10, 2013, 04:32:32 PM »
john, aka supercat, picked up my fed and brought it out from cali 2 yrs ago. can't thank him enough and tease him too.  ;D

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Re: New member 200" Supercat FED
« Reply #10 on: July 10, 2013, 04:55:24 PM »
Johnny I'll be going by your way in a few weeks. I have to drop off another little dragster up your way. I'll pick it up at the NHRA museum soon and then head north.
I'll give you a shout when I know my schedule.

I talked with one of the ANRA  regulars today and he said our car should not have any problem running in NE1. He personally has 3-4 cars in the class at any one time. :o
« Last Edit: July 10, 2013, 05:31:27 PM by Supercat »

Offline buickfed

  • Full Member
  • ***
  • Posts: 191
    • View Profile
Re: New member 200" Supercat FED
« Reply #11 on: July 10, 2013, 05:50:54 PM »
let me know when

Offline Dolmetsch

  • Sr. Member
  • ****
  • Posts: 339
    • View Profile
  • Your Best Time: dont bother with times anyome (last 4 years) just
  • Your Engine: 225 slant six Dodge . 246 cubes on 94 octane
  • Your Track: Picton Airfield
  • Your Vehicle: The Senior Dragster
Re: New member 200" Supercat FED
« Reply #12 on: July 11, 2013, 03:57:19 AM »
And I thought I was the only one who carried his dragster in the back of his pick up.
Don
SR Dragster, because old people need to have fun too!

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: New member 200" Supercat FED
« Reply #13 on: July 11, 2013, 05:35:45 AM »
And I thought I was the only one who carried his dragster in the back of his pick up.
Don
I was wondering how long it would take for you to see this
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline buickfed

  • Full Member
  • ***
  • Posts: 191
    • View Profile
Re: New member 200" Supercat FED
« Reply #14 on: July 11, 2013, 03:19:49 PM »
he had mine on the roof of his truck. lol