« previous next »
Pages: [1]   Go Down

Author Topic: Steering link rod  (Read 6149 times)

Offline buickfed

  • Full Member
  • ***
  • Posts: 191
    • View Profile
Steering link rod
« on: June 22, 2013, 06:28:24 PM »
192" w/b. from the pitman arm, I have two long shafts that go to the front. the front link, about 6' long, likes to bow way out when the car is slow moving on turns. do they make bigger diameter links or should I put another eye on like the first one goes thru?
Logged

Offline FatOldGuy

  • Newbie
  • *
  • Posts: 11
    • View Profile
  • Your Best Time: 7.99
  • Your Engine: FED ,Alcohol,540 Merlin
  • Your Track: Great Lakes Dragaway
  • Your Vehicle: 200" blown alcohol FED
Re: Steering link rod
« Reply #1 on: June 23, 2013, 05:07:16 AM »
What I did to fix mine was to keep the same OD rod, and just went with a thicker wall tube.
Logged

Offline AF150

  • Jr. Member
  • **
  • Posts: 92
  • The Devil is in the Details
    • View Profile
  • Your Best Time: 7.37 1/4 mile
  • Your Engine: Early Hemi, 365", Blown Alky
  • Your Track: Tulsa Raceway Park
  • Your Vehicle: 200" FED
Re: Steering link rod
« Reply #2 on: June 23, 2013, 12:01:07 PM »
Maybe a 3 piece would be better.
Logged
MB

Offline BK

  • Sr. Member
  • ****
  • Posts: 310
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Re: Steering link rod
« Reply #3 on: June 24, 2013, 06:51:46 PM »
I slid the next size tube over mine.
Logged

Offline buickfed

  • Full Member
  • ***
  • Posts: 191
    • View Profile
Re: Steering link rod
« Reply #4 on: June 24, 2013, 07:50:30 PM »
Quote from: FatOldGuy on June 23, 2013, 05:07:16 AM
What I did to fix mine was to keep the same OD rod, and just went with a thicker wall tube.

what did you do about the heim joints?
Logged

Offline FatOldGuy

  • Newbie
  • *
  • Posts: 11
    • View Profile
  • Your Best Time: 7.99
  • Your Engine: FED ,Alcohol,540 Merlin
  • Your Track: Great Lakes Dragaway
  • Your Vehicle: 200" blown alcohol FED
Re: Steering link rod
« Reply #5 on: June 25, 2013, 03:23:11 AM »
I just cut the old tube ends off and welded them back on.reused all the old parts.
Logged
Pages: [1]   Go Up
« previous next »