Author Topic: Woody Gilmore FED Going Down Under  (Read 17122 times)

Offline Hotrodhoodlum

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Track: Byron Dragway
  • Your Vehicle: Woody Gilmore FED
Woody Gilmore FED Going Down Under
« on: June 18, 2013, 11:43:39 AM »
Going Down Under
« Last Edit: June 23, 2013, 06:34:27 PM by Hotrodhoodlum »

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Woody Gilmore FED Roll add your engine and trans go racing
« Reply #1 on: June 18, 2013, 12:48:22 PM »
Will Fit 6 foot tall Driver

Nice Ready to go roller did run a 426 Hemi I do have phone Number of previous owner
This is a nice piece of history Ran on the east cost at New England Drag way in 1968 Origional driver was Ron Macassy out of Canada

165" 1968 Chrome Molly Woody Gilmore Chassis has drill hole to check Cert back when it ran a Ran National Event Now has
updated helmet bars will pass tech It Ran in the 5'40s last year with a small block Chevrolet 1/8 mile has updated helmet bars will pass tech

Full Auminum Body good condition very easy ro repaint

Toggle Switch Panel

Adjustable Wheelie Bars

Drag Chut

Chrome adjustable torsion bar front end

Custom fuel tank

Vintage aftermarket 8.75 Chrysler rear / 4.56 Gear

Radiator electric fan

15x10 American Racing Wheels

Retro Front Spokes

Good Year Slicks many runs left

Put you engine combo in your choice Ford Chevy Chrysler

You can Email me at hotrodhoodlum@comcast.net

You can all ways call me at 331-642-4608

I thought you were building a SBC for this????????
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Hotrodhoodlum

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Track: Byron Dragway
  • Your Vehicle: Woody Gilmore FED
Re: Woody Gilmore Going Down Under
« Reply #2 on: June 18, 2013, 01:19:09 PM »
Going Down Under
« Last Edit: June 23, 2013, 06:34:47 PM by Hotrodhoodlum »

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Woody Gilmore FED Roll add your engine and trans go racing
« Reply #3 on: June 18, 2013, 02:46:26 PM »
I would love to keep it but im having to many problems with my back I  need a door car Way to hard getting in and out for me
Sorry to hear that, I went through back problems three years ago and had someone drive the dragster while I recovered. It killed me to watch it go down the track.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Hotrodhoodlum

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Track: Byron Dragway
  • Your Vehicle: Woody Gilmore FED
Re: Woody Gilmore FED Roll add your engine and trans go racing
« Reply #4 on: June 18, 2013, 04:35:38 PM »
I just came to realize  working in the garage today im to frickin old to hop in and out. Iv had 2 back surgerys and a spinal cord surgery  its time to be smart keep racing instead of watching
« Last Edit: June 23, 2013, 06:35:03 PM by Hotrodhoodlum »

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Woody Gilmore FED Roll add your engine and trans go racing
« Reply #5 on: June 18, 2013, 08:59:48 PM »
I just came to realize  working in the garage today im to frickin old to hop in and out. Iv had 2 back surgerys and a spinal cord surgery  its time to be smart keep racing instead of watching
I'm 63 this year and not ready to give up to old man time yet.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Hotrodhoodlum

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Track: Byron Dragway
  • Your Vehicle: Woody Gilmore FED
Re: Woody Gilmore FED Roll add your engine and trans go racing
« Reply #6 on: June 18, 2013, 09:16:37 PM »
Im happy for you

Offline slingshot383

  • Full Member
  • ***
  • Posts: 143
    • View Profile
  • Your Best Time: 1/4 mi. 7.95 @ 168
  • Your Engine: Chrysler, alcohol, 528 cu.in.
  • Your Track: Gateway Motorsports Park (the Swamp)
  • Your Vehicle: Undercover Chassis 23T altered
Re: Woody Gilmore FED Roll add your engine and trans go racing
« Reply #7 on: June 20, 2013, 05:42:05 AM »
Except for the full body, that is a twin to my old Woody Gilmore car.  Short wheelbase, engine way back, a shorty Glide and cutting the coupler down to 4" was the only way to get everything to fit. 
Undercover 23T Altered, big block Mopar
Member of the Torque and Recoil Club

Offline Hotrodhoodlum

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Track: Byron Dragway
  • Your Vehicle: Woody Gilmore FED
Re: Woody Gilmore FED Going Down Under
« Reply #8 on: June 20, 2013, 06:34:52 AM »
Going Down Under
« Last Edit: June 23, 2013, 06:35:50 PM by Hotrodhoodlum »

Offline Hotrodhoodlum

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Track: Byron Dragway
  • Your Vehicle: Woody Gilmore FED
Re: Woody Gilmore FED Going Down Under
« Reply #9 on: June 20, 2013, 06:37:06 AM »
Going Down Under
« Last Edit: June 23, 2013, 06:36:06 PM by Hotrodhoodlum »

Offline Hotrodhoodlum

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Track: Byron Dragway
  • Your Vehicle: Woody Gilmore FED
Re: Woody Gilmore FED Roll add your engine and trans go racing
« Reply #10 on: June 20, 2013, 06:38:15 AM »
I just came to realize  working in the garage today im to frickin old to hop in and out. Iv had 2 back surgerys and a spinal cord surgery  its time to be smart keep racing instead of watching
« Last Edit: June 23, 2013, 06:36:57 PM by Hotrodhoodlum »

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Woody Gilmore FED Roll add your engine and trans go racing
« Reply #11 on: June 20, 2013, 07:06:46 AM »
Im happy for you
I have thought about this response. I only meant it as encouragement.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Woody Gilmore FED Roll add your engine and trans go racing
« Reply #12 on: June 20, 2013, 07:08:08 AM »
I just came to realize  working in the garage today im to frickin old to hop in and out. Iv had 2 back surgerys and a spinal cord surgery  its time to be smart keep racing instead of watching
Love the old style wheelie bar
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Hotrodhoodlum

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Track: Byron Dragway
  • Your Vehicle: Woody Gilmore FED
Re: Woody Gilmore FED Roll add your engine and trans go racing
« Reply #13 on: June 20, 2013, 07:32:35 AM »

Not a problem Im  just real bitchy Sorry
Im just pretty disgusted with not being able to run the digger May be an Altered would be easier to get in and out of



Im happy for you
I have thought about this response. I only meant it as encouragement.
[/quote]

Offline Hotrodhoodlum

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Track: Byron Dragway
  • Your Vehicle: Woody Gilmore FED
Re: Woody Gilmore FED Going Down Under
« Reply #14 on: June 23, 2013, 06:35:23 PM »
Going Down Under