Technical > Roo Man's Room

MIG welded mild steel chassis ??

<< < (2/2)

225digger:
if you have a tig just tack it with that ..... if you have your joints nice and tight just set your amps at like 100 get the point of your tungsten close to the joint and just floor the pedal it will "fuse" the joint thus creating a tack weld ....... i know its probably not the preffered way to do it . but its the way i do it and i never had an issue doing it this way  ..... then you can come over it with filler with no issues .....

Navigation

[0] Message Index

[*] Previous page