Social > Your Builds / Photo Gallery

Glenn's dragster thread

<< < (49/54) > >>

GlennLever:
We have a gear drive, but is on the list of things to check when we pull the front drive.

gregm784:
I change my belt when i change my rods.  2 years, 100 'ish runs.

GlennLever:
Steve Walczak, Gary O ’corner, and myself worked on the dragster from noon to four today, pulled the front drive, no result, pulled the pan, cannot get it all the way off in the dragster because of the pickup tube. All looks good though, rods have movement side to side. Pulled the rockers, no result, can only get five of the six torque converter bolts out because the engine locks up in a spot where we cannot get to the last bolt to remove it. No result. Next step is to pull the transmission. Maybe later tonight.

GlennLever:
Transmission is out, not the problem, pulled the engine, pulled the front cover, not the problem, pulled the pan, not the problem, pulled the heads. Found this. Have no idea what or how it got there. I have two screens in the injector hat, I have weed burner exhausts (they point down not up), the intake is in tack, no pieces missing, I need to turn the blower (brand new seven runs on it) upside down to see if I can see anything.,

Paul New:
Looks like it didn’t do to much damage.  Do you run a screen under you hat?  I do on my car and I have found ssome stuff that I am glad it caught!! Not sure how it got in there either I found a 1/2” nut until there once!!! Not sure if I can issue someone off or it just flew up off the track

Navigation

[0] Message Index

[#] Next page

[*] Previous page