Author Topic: Clutch can blow back struts  (Read 2701 times)

Offline gordon

  • Newbie
  • *
  • Posts: 43
    • View Profile
  • Your Track: Sacramento
  • Your Vehicle: FED
Clutch can blow back struts
« on: January 06, 2024, 01:42:20 PM »
Changing out the after market PG trans for Lenco two spd and clutch. Any of you guys have good pix of how the blow back struts were done on your chassis ? I know there are 16 ways to skin a cat and the cat is not fond of any of them , at the same time I don't want to reinvent the wheel is some one has a good  one that rolls well .

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: Clutch can blow back struts
« Reply #1 on: January 23, 2024, 02:04:33 PM »
Hey Gordon, i have a couple pictures i'll send you via text.  Pretty slick, easy to work on ideas.  I still need to add them to mine.......
Greg
El Dorado County, CA
www.meansracing.com

Offline gordon

  • Newbie
  • *
  • Posts: 43
    • View Profile
  • Your Track: Sacramento
  • Your Vehicle: FED
Re: Clutch can blow back struts
« Reply #2 on: January 24, 2024, 02:54:05 PM »
Thanks Greg , Id love to see them.

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: Clutch can blow back struts
« Reply #3 on: January 27, 2024, 06:28:25 PM »
On A/Fue;l car we have a sleeve sitting over upright and the blowback bolted to two tabes welded to it. I pull two quick  pins and rotate to the side pull the clutch.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot