Author Topic: down nozzles with MFI  (Read 4529 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
down nozzles with MFI
« on: December 23, 2023, 11:08:53 AM »
While I know not allowed in nostalgia competition . Wondering if anyone here has run down nozzle with MFI(no blower)?

Asking because have been wanting to install on my fed.Heads are already setup for it. Plus thinking with alky running thru lines and oil running over outside it should have minor cooling effect on oil temp. The fact it will have a lot of folks wondering where fuel is going to engine has nothing to do with it.LOL

So anyone treid down nozzle with mfi system?
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline Ray Hadford

  • Newbie
  • *
  • Posts: 8
    • View Profile
  • Your Best Time: 1/4= 6.72 202.20 mph
  • Your Engine: Supercharged 400 sbc methanol fuel
  • Your Track: Pacific Raceways
  • Your Vehicle: 2002 225 " Spitzer FED
  • General Location: Northwest, Everett WA
Re: down nozzles with MFI
« Reply #1 on: January 27, 2024, 05:38:43 PM »
Down Nozzles are  worth over 50 Horsepower in a 410   Sprint car motor.  The atomized fuel does not block port air flow.