Author Topic: Who builds own engine  (Read 2640 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Who builds own engine
« on: January 17, 2023, 09:28:33 AM »
 I have noticed that majority of racres seem to buy engine instead of build themselves. Now nothing wrong with that and my be better in log run.

I know when I started racing in 1985 there was two or three guys who bought enignes and the rest built or had abuddy who did. Now days it seems almost the exact oppisite. For me if not for building engine and most of time the whole car I would not have much interest in racing. I actually enjoy building and tuning more than driving. driver is just there to prove tune up works and engine makes power. LOL With that said I was told long time ago by Alan Satrr never put brains,talent and money in one spot. I have obey that few times but broken more.

Wondering since mostly older racers here. How many build your own engine,trans,rear ends ,chassis and or combo of?
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline gordon

  • Newbie
  • *
  • Posts: 43
    • View Profile
  • Your Track: Sacramento
  • Your Vehicle: FED
Re: Who builds own engine
« Reply #1 on: January 17, 2023, 09:50:05 AM »
I do my own engines. All of the assembly work and some of the machine work. I borrow time on a flow bench for my heads .

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: Who builds own engine
« Reply #2 on: January 17, 2023, 06:12:48 PM »
I farm out my block machining.
I farm out my crankshaft machining.
I farm out my torque converter builds.
I farm out my transmission builds.
Other than that I build my motors. When you are racing a crossflow headed inline six cylinder there is very little you can get by opening a racing catalog.

Offline tcoupekyle

  • Sr. Member
  • ****
  • Posts: 354
    • View Profile
  • Your Best Time: 4.70 1/8
  • Your Track: Houston Motorsport park
  • Your Vehicle: 225" slip joint FED
  • General Location: Houston
Re: Who builds own engine
« Reply #3 on: January 18, 2023, 08:56:41 AM »
I build my own engines

Offline JEFF/21C

  • Full Member
  • ***
  • Posts: 122
    • View Profile
  • Your Best Time: N/A
  • Your Engine: 306 SBC INJECTED ALKY
  • Your Track: NONE
  • Your Vehicle: 23 T ALTERED
  • General Location: eastern canada
Re: Who builds own engine
« Reply #4 on: January 18, 2023, 10:59:57 AM »
i use to build alot more motors for myself and others everything from flathead harley's to blown big block chevies and hemi's had the machine work farmed out, I've slowed down now and just do street stuff, and do transmissions, diff's built cars from rollers to turn key, one winter built 5 cars 3 rollers and 2 turn key. now I'm working on a 371 olds with 6 carbs and a 350 with 2x4 intake for street rods at 75 i'm taking it easy.