« previous next »
Pages: [1]   Go Down

Author Topic: Built my own butterfly steering wheel  (Read 9221 times)

Offline ricci32

  • Full Member
  • ***
  • Posts: 142
    • View Profile
  • Your Engine: sbc ,gas, 358cid
  • Your Track: Lebanon Valley
  • Your Vehicle: Vintage style FED
Built my own butterfly steering wheel
« on: April 24, 2013, 04:55:58 PM »
 Since the FED i built is custom to fit me 5'8" #240  and 3' at the shoulders everything on my car is a little custom the chassis is 23"wide etc. I need a butterfly wheel that was comfortable and looked right with the car made a cardboard templet pickeup some 1/8 aluminium plate a good friend is a automotive machinest and has cnc machine take a look at what we made.
Logged

Offline ricci32

  • Full Member
  • ***
  • Posts: 142
    • View Profile
  • Your Engine: sbc ,gas, 358cid
  • Your Track: Lebanon Valley
  • Your Vehicle: Vintage style FED
Re: Built my own butterfly steering wheel
« Reply #1 on: April 24, 2013, 04:59:37 PM »
The hand grips are multi colored lexan red and black laminated then edges buffed like a street rod knob.
Logged

Offline ricci32

  • Full Member
  • ***
  • Posts: 142
    • View Profile
  • Your Engine: sbc ,gas, 358cid
  • Your Track: Lebanon Valley
  • Your Vehicle: Vintage style FED
Re: Built my own butterfly steering wheel
« Reply #2 on: April 24, 2013, 05:03:38 PM »
pics
Logged

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Built my own butterfly steering wheel
« Reply #3 on: April 24, 2013, 09:04:15 PM »
We have a fabricator on our hands.
Logged
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline ricci32

  • Full Member
  • ***
  • Posts: 142
    • View Profile
  • Your Engine: sbc ,gas, 358cid
  • Your Track: Lebanon Valley
  • Your Vehicle: Vintage style FED
Re: Built my own butterfly steering wheel
« Reply #4 on: April 25, 2013, 02:50:40 AM »
Not really a fabricator just enjoy making my own stuff. Racing dirt modifieds for 25 years you get used to repairing your own stuff im not used to working on a car that will stay nice. Thanks
« Last Edit: April 25, 2013, 06:08:13 AM by GlennLever »
Logged

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Built my own butterfly steering wheel
« Reply #5 on: April 25, 2013, 06:07:34 AM »
Quote from: ricci32 on April 25, 2013, 02:50:40 AM
Not really a fabricator just enjoy making my own stuff. Racing dirt modifieds for 25 years you get used to repairing your own stuff im not used to working on a car that will stay nice. Thanks

Nice, no cussing allowed on this forum
Logged
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline MaggiFinn

  • Jr. Member
  • **
  • Posts: 54
    • View Profile
  • Your Engine: SBC 355-406
  • Your Track: Kvartmiluklubburinn
  • Your Vehicle: FED
Re: Built my own butterfly steering wheel
« Reply #6 on: April 25, 2013, 08:42:30 AM »
Someday I would like to replace the billet handles on my butterfly for wooden ones. For the nostalgic effect.
Logged

Offline tylercrawford

  • Newbie
  • *
  • Posts: 47
    • View Profile
Re: Built my own butterfly steering wheel
« Reply #7 on: April 25, 2013, 09:03:45 AM »
looks good!  :D

Was planning on building one but I found one for free from a guy's shop in our building.  Couldn't pass that up
Logged

Offline afaulk

  • Full Member
  • ***
  • Posts: 126
    • View Profile
  • Your Best Time: 4.69 @ 145 1/8 mile
  • Your Engine: 370" Blown Alky Chevy
  • Your Track: I-22 Motorsports Park, Eldridge, AL
  • Your Vehicle: 186" Faulkner FED
  • General Location: North Alabama
Re: Built my own butterfly steering wheel
« Reply #8 on: April 25, 2013, 06:20:59 PM »
Looks good! How did ya hold the Butterfly still, to get your pattern?  ;)
Logged
Pages: [1]   Go Up
« previous next »