Drag Racing Discussions > Front Engine Dragsters

Build a budget set of zoomie sbc headers for under $100

<< < (2/3) > >>

masracingtd1167:
If you feel funny after welding galvanised drink some milk . It dose work.

afaulk:
Like you, i enjoy building everything that I can. This a good tip.            The J-bends, etc. from the suppliers such as Jegs are usually 16 ga which is about .063. Looks like the only differences in the two are galv. and the bend radius. The large bend radius like you have is more "old school looking". I have a set of homebuilt zoomies on my car, built out of chassis tubing.  I'm gonna learn to post pics. I'm gonna, I'm gonna...... ::)

GlennLever:
There are really two different ways to post pictures.

One is to put the pictures up on a web posting site and provide a lint to it here.

The second more common one is to upload them from your computer.

This may sound complicated but it really isn't.

You want your pictures to be 800 X 600

The way I down size my pictures is I e-mail them to myself. When you select a picture to be e-mailed your software will ask you if you want to send them full size or downsize. One option will be to downsize to 800X600.

Select the 800X600 and e-mail them to your self.

When they arrive in your in box save them to a folder on your computer.

Now you are ready to post a topic with pictures, enter your text into the box, directly below the box is "Attachments and other options" when you click on this you will be able to browse your folders and click on the pictures you want to attach. You have to do one picture at a time.

If this does not make sense send me the pictures and I will post and attache them to a topic you would like the associated with.

wideopen231:

--- Quote from: masracingtd1167 on April 24, 2013, 02:59:41 PM ---If you feel funny after welding galvanised drink some milk . It dose work.

--- End quote ---

If drinking milks the cure I should be covered Im on about a gallon a day habbit right now.

tylercrawford:

--- Quote from: GlennLever on April 26, 2013, 08:22:14 PM ---One is to put the pictures up on a web posting site and provide a lint to it here.
--- End quote ---

FWIW, most upload sites have an option to scale your images when you upload them as well.

I know imageshack does . . .

I went the "expensive" route but jegs had the flanges on sale for $20, does that count?  ;D

Navigation

[0] Message Index

[#] Next page

[*] Previous page