« previous next »
Pages: [1]   Go Down

Author Topic: Piston rings?  (Read 3058 times)

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Piston rings?
« on: December 25, 2021, 11:39:24 AM »
What are the common composition of rings for an alcohol engine ? Blown or NA.
Finally putting my engine together.
 I have two different ring sets here that will work for my 4.500 bore. Just want to see what people here think.
This is a 9000 rpm 11-11.5 compression engine
Logged

Offline Dunc the Funk

  • Jr. Member
  • **
  • Posts: 67
    • View Profile
  • Your Best Time: 7.50 @ 178 mph 1/4 mile
  • Your Engine: Big block Chevy, 517ci, 8/71 blower, methanol
  • Your Track: Santa Pod, UK
  • Your Vehicle: 23 T altered "Thundergod"
  • General Location: Yorkshire, England
Re: Piston rings?
« Reply #1 on: December 30, 2021, 09:47:21 AM »
Last season I put Speed Pro HellFire rings in our 4.53" bore BBC, 10.5:1 static, Littlefield LB22 blower with hi-helix rotors, methanol injection.
Ran 7.50 @ 180 1/4 with plenty left (only 3% od on blower!).
Stripped it today, no issues at all, keeping same rings in for next season. Part no R1910735.
Logged

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Re: Piston rings?
« Reply #2 on: January 01, 2022, 07:27:10 AM »
Thanks for the info,  I'll check out the rings to see how they compare to what I have. If needed I may try them out.
Logged

Offline e-drag

  • Newbie
  • *
  • Posts: 23
    • View Profile
  • Your Best Time: 6.32 236 1/4mi
  • Your Engine: 468 TFX HEMI
  • Your Track: Barona
  • Your Vehicle: AA/FA
  • General Location: LoCal
Re: Piston rings?
« Reply #3 on: January 04, 2022, 09:26:08 AM »
Call Bruce for you piston ring needs:

http://bwepistonrings.com/

Tel: (661) 644-6118

He is in Idaho now...
Logged

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: Piston rings?
« Reply #4 on: January 04, 2022, 04:40:11 PM »
IN our TA/FC and TA/D we ran SS dyke top and gapless secondary/ Worked great/Held up very well and were anything but easy on the motors. TA/FC leave was 6500 and shifts were 9000 to 9500.TA/D leave was 7000 and shifts were 10,500. Rarely had any leakage to speak of and 99% of the time was not ring problem.
Logged
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot
Pages: [1]   Go Up
« previous next »