Technical > Matt Shaff's Engine Shop

Rod piston issue SBC

<< < (3/4) > >>

tcoupekyle:
Thanks Paul.
Ended up doing a deal with JE on a custom Piston. Guy over there named Greg was really helpful.

Paul New:
Excellent!  Glad you were able to come up with a plan

tcoupekyle:
So plan is 3.75 stroke. So I need to buy a crank. Looking at a Howards... Any opinions?

JEFF/21C:
the only crankshaft that wasn't up to spec was Eagle all the other different brands I've used  were what I expected they varied depending on project, never used a Howard you should call and talk to a tech and tell him what you want and ask for his opinion if your not using a snout support go for a bbc snout with double keyways ran a 406, 6/71 30% over  with no problems

tcoupekyle:
I have a snout support but since I got to buy a crank I'm thinking of going with the BBC snout and changing the support.

Navigation

[0] Message Index

[#] Next page

[*] Previous page