Drag Racing Discussions > Front Engine Dragsters
wheel disc
grapro:
I just bought a aluminum wheel disc for my front wheels and was wondering what was the best way to mount it. There are 3 small clips with it, do they get riveted on on what is the proper way?
wideopen231:
Call Jon at Hayden wheels or might get him here if he does not chime in.
BK:
Mine were riveted over spokes. On the right side.
sknopp:
Mine was fastened in 3 places, equally spaced. An stainless steel strap about 1/4" wide, maybe 3/4" long and 1/16" thick went around a spoke and was riveted to the disc using 2 rivets. I took it off many years ago because I thought it looked better without. I think the staging beam heights are pretty stand now so you probably don't need it as far as function is concerned. I was at a car show once and a guy wanted to know why I only had a hubcap on one side!
Steve K.
JEFF/21C:
We have wire wheels and used tie wraps to hold nylon disc in place
Navigation
[0] Message Index
[#] Next page
Go to full version