« previous next »
Pages: [1]   Go Down

Author Topic: Fuel tank  (Read 3564 times)

Offline jlesliel

  • Newbie
  • *
  • Posts: 18
    • View Profile
  • Your Best Time: 5.17 131 1/8
  • Your Engine: None
  • Your Track: North Star dragway
  • Your Vehicle: FED
  • General Location: DFW
Fuel tank
« on: November 30, 2020, 04:57:22 PM »
Does anybody make a rectangle tank for a FED? I'd like to find something rectangular that will fit inside the frames rails toward the front of my car. does anybody have anything?
Logged

Offline Paul New

  • Hero Member
  • *****
  • Posts: 743
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: Fuel tank
« Reply #1 on: November 30, 2020, 08:43:31 PM »
They are typically custom built for the application
Logged

Offline jlesliel

  • Newbie
  • *
  • Posts: 18
    • View Profile
  • Your Best Time: 5.17 131 1/8
  • Your Engine: None
  • Your Track: North Star dragway
  • Your Vehicle: FED
  • General Location: DFW
Re: Fuel tank
« Reply #2 on: December 01, 2020, 04:42:50 PM »
Kinda what I thought... Thought I might get lucky. :(
Logged

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Re: Fuel tank
« Reply #3 on: December 01, 2020, 08:01:05 PM »
What size is the space you have to put the tank in? How many gallons does it need to be?
Logged

Offline jlesliel

  • Newbie
  • *
  • Posts: 18
    • View Profile
  • Your Best Time: 5.17 131 1/8
  • Your Engine: None
  • Your Track: North Star dragway
  • Your Vehicle: FED
  • General Location: DFW
Re: Fuel tank
« Reply #4 on: December 02, 2020, 03:35:54 PM »
I don't know exactly the size of the area and my car is 30 miles from my home so I won't be able to measure till the weekend. I've started looking at aluminum square tubing. It's available in 6x6 and 8x8.  I know the 6x6 will fit. 6x6x24 would give me a little over 3 gallons which would be plenty. 8x8 would fill the area better and probably look better than the 6x6.
Logged

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Re: Fuel tank
« Reply #5 on: December 02, 2020, 04:19:49 PM »
Bring some good cardboard and tape with you. Make a mockup while you are at the car. Make it the same size as the maximum size it could be. That way you will know what you have to work with.
Logged

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: Fuel tank
« Reply #6 on: December 02, 2020, 05:48:16 PM »
Fun Fact:

1 gallon = 231 cu.in.

If you decide on the aluminum square tube you could split it down the middle and add a wedge or panel to fil the space between the rails.
Logged

Offline jlesliel

  • Newbie
  • *
  • Posts: 18
    • View Profile
  • Your Best Time: 5.17 131 1/8
  • Your Engine: None
  • Your Track: North Star dragway
  • Your Vehicle: FED
  • General Location: DFW
Re: Fuel tank
« Reply #7 on: December 03, 2020, 03:05:30 PM »
That's a good idea. Thanks to all for your input.
Logged
Pages: [1]   Go Up
« previous next »