Author Topic: How to determine what spindles I have  (Read 4299 times)

Offline 1000hpJohn

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
  • Your Best Time: 8.70/154mph
  • Your Track: Norwalk, Milan Dragway
  • Your Vehicle: 8 sec. ElCamino
How to determine what spindles I have
« on: September 06, 2020, 05:53:53 AM »
 OK, let’s get this party started.    How do I tell what spindles I have on my 32 Bantam 125 inch altered chassis?   Built at Advanced Chassis in the 80’s.   I will call them Tuesday but  thought maybe I could get the answer before then.
 Any help is appreciated.

 What’s the process to post a picture?

Offline 1000hpJohn

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
  • Your Best Time: 8.70/154mph
  • Your Track: Norwalk, Milan Dragway
  • Your Vehicle: 8 sec. ElCamino
Re: How to determine what spindles I have
« Reply #1 on: September 06, 2020, 06:26:16 AM »
I found a little info .    Should  have done my homework before this post.
The spindles say CSPE on the top plate.

Offline Draw 3D

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
  • Your Engine: Blown Alky 406 SBC
  • Your Track: Wild Horse Pass
  • Your Vehicle: 1923 T Roadster
  • General Location: Arizona
Re: How to determine what spindles I have
« Reply #2 on: September 07, 2020, 07:47:01 AM »
On the spindle, where the outer bearings ride just behind the axle nut, the Anglia is approximately .625 diameter, the Strange is .750 diameter.

Offline 1000hpJohn

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
  • Your Best Time: 8.70/154mph
  • Your Track: Norwalk, Milan Dragway
  • Your Vehicle: 8 sec. ElCamino
Re: How to determine what spindles I have
« Reply #3 on: September 09, 2020, 03:25:53 PM »
Thanks draw3d, they are Anglia spindles.
Um, will you sell me your front wheels????
There the exact style I want.   Anyone have a set for sale?  The alum. Kind not the magnesium.

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: How to determine what spindles I have
« Reply #4 on: September 17, 2020, 04:10:46 PM »
On the nut end dia .625" [5/8"] is Anglia, and .750" [3/4"] is Early Ford, the lenght are different too.
BTW as per NHRA wire spoke wheels are not allowed on alters or dragsters that over 1800 lbs [ no driver]
Jon Hansen, Hayden ent, 800-624-3803
Jon C. Hansen

Hayden Wheels

Offline invilia

  • Newbie
  • *
  • Posts: 6
    • View Profile
    • how to use dapoxetine 30mg
  • Your Best Time: Ucywoz
  • Your Engine: Ubucucety
  • Your Track: Uqosocuq
  • Your Vehicle: Yfuhuf
  • General Location: Etosote
Re: How to determine what spindles I have
« Reply #5 on: July 16, 2024, 03:50:41 AM »
E Transgenic eGFP expression was quantified in peripheral blood leukocytes of single transgenic tTA, TREA1 <a href=http://cialis.lat/discover-the-best-prices-for-cialis>buy cialis non prescription</a>