Drag Racing Discussions > Front Engine Dragsters
FED bounce problem.
afaulk:
You beat me to it...I was going to suggest the same thing.
BK:
To expand on Jeff/21s idea.
Clamshells on the end of a tube and hose clamp them on.
Should be good enough for a test.
Especially if you could come up with aircraft style clamps.
jeff/21:
clamps could be simple tubing that is cut length wise, into two halves before cutting you weld pieces of tubing across so you could insert small bolts to clamp i would use 4 bolts for better clamping and they could be smaller, there are so many ways you could do it keep it simple
Curly1:
I will try to pull the body off soon and see if there is a way I can do that.
Curly1:
Okay for an update. I changed rear tires to the MT 10.5Wx33 and they seem a little better but did not completely resolve the issues. So I took car to my chassis guy and added in some braces in two compartments in front of motor. Car works pretty good now and Won me my 4 th NE2 Championship. Car works good now and is fun to drive. By just moving a little weight I can do huge wheelies or barely any wheelies. As much fun as it is to drive I am going to sell it soon, prefer driving Altereds and bought me a nice 4 link Altered with Strut Front and four wheel brakes. Much easier to load and unload and can go back to shorter trailer with bathroom package so I can make some long distance races.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version