Author Topic: Oil Pan Heaters  (Read 5850 times)

Offline spitzerscott

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • Ogg Motorsports
  • Your Best Time: 5.73@118.80
  • Your Engine: 336 Small Block Chevy
  • Your Track: Osceola IN, Top Eliminator runs 1/8 mile
  • Your Vehicle: Spitzer225 RED, Alcohol SBC
  • General Location: Northern Indiana
Oil Pan Heaters
« on: March 14, 2020, 08:31:15 AM »
We just got one of the Jeg's self adhesive pad oil pan heaters, it is 400watt.  Have any of you used these, and how long will it take to bring 8 quarts of oil up to temp?

Offline msundstrom

  • Full Member
  • ***
  • Posts: 119
    • View Profile
  • Your Best Time: 7.45 @ 182 in 1/4
  • Your Engine: NA Injected 505 BBC on 45%
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: FED
  • General Location: Washington Coast
Re: Oil Pan Heaters
« Reply #1 on: March 14, 2020, 10:26:59 AM »
Mine takes about an hour for 12 quarts

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: Oil Pan Heaters
« Reply #2 on: March 14, 2020, 05:59:16 PM »
My 8qt pan takes about 20 minutes but I have the heating element in the oil.
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/

Offline George

  • Hero Member
  • *****
  • Posts: 515
    • View Profile
  • Your Vehicle: 1964 Mercury Comet Super Stock/ M automatic
  • General Location: Midwest USA
Re: Oil Pan Heaters
« Reply #3 on: March 18, 2020, 10:57:09 AM »
I used block heaters in the water jackets as well as a immersion type 400 watt heater. Heads and block were water filled. It makes for a good pre start warmup.

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: Oil Pan Heaters
« Reply #4 on: April 03, 2020, 10:10:04 AM »
if you run a diaper, can you run a stick on?  i'm not sure how hot they get
Greg
El Dorado County, CA
www.meansracing.com

Offline msundstrom

  • Full Member
  • ***
  • Posts: 119
    • View Profile
  • Your Best Time: 7.45 @ 182 in 1/4
  • Your Engine: NA Injected 505 BBC on 45%
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: FED
  • General Location: Washington Coast
Re: Oil Pan Heaters
« Reply #5 on: April 03, 2020, 11:38:48 AM »
No, ask me how I know

Mark S

Offline 32bantam

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • SS3 Race Team
  • Your Best Time: 6.87 at BG 2013 aiming for 7.0
  • Your Track: Empire Dragway, NY
  • Your Vehicle: 32 Bantam altered
Re: Oil Pan Heaters
« Reply #6 on: April 04, 2020, 07:41:06 AM »
If you run a diaper...and you should be!!!  it will burn/char the absorent. I tried it !!!!!   Now I use a Stephs immersion heater. Works great
Steve Walczak

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: Oil Pan Heaters
« Reply #7 on: April 05, 2020, 02:18:47 PM »
Steve, i've been known to have catastrophic oil pan failure before.  I wouldn't make a run without a diaper.

Thanks.  next time the pan is off, i'll have a bung installed for an immersion heater. I don't want to have to drop the diaper each day.  I appreciate the info.
Greg
El Dorado County, CA
www.meansracing.com

Offline 32bantam

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • SS3 Race Team
  • Your Best Time: 6.87 at BG 2013 aiming for 7.0
  • Your Track: Empire Dragway, NY
  • Your Vehicle: 32 Bantam altered
Re: Oil Pan Heaters
« Reply #8 on: April 07, 2020, 12:58:51 PM »
Greg......I know you do!!!!   It was a general answer.... You will love the emersion. After we get home from a race aI will pull the valve covers and leave it plugged in for a couple of days to evaporate any alky left.
Steve Walczak

Offline spitzerscott

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • Ogg Motorsports
  • Your Best Time: 5.73@118.80
  • Your Engine: 336 Small Block Chevy
  • Your Track: Osceola IN, Top Eliminator runs 1/8 mile
  • Your Vehicle: Spitzer225 RED, Alcohol SBC
  • General Location: Northern Indiana
Re: Oil Pan Heaters
« Reply #9 on: May 10, 2020, 08:57:15 AM »
We do have an insulated pad between the heating pad and the absorbing pad that will take 450F continues and 1100F surge.

Offline msundstrom

  • Full Member
  • ***
  • Posts: 119
    • View Profile
  • Your Best Time: 7.45 @ 182 in 1/4
  • Your Engine: NA Injected 505 BBC on 45%
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: FED
  • General Location: Washington Coast
Re: Oil Pan Heaters
« Reply #10 on: May 10, 2020, 10:52:20 AM »
Do you have a manufacturer or part number of what you're using?
Thanks
Mark S

Offline spitzerscott

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • Ogg Motorsports
  • Your Best Time: 5.73@118.80
  • Your Engine: 336 Small Block Chevy
  • Your Track: Osceola IN, Top Eliminator runs 1/8 mile
  • Your Vehicle: Spitzer225 RED, Alcohol SBC
  • General Location: Northern Indiana
Re: Oil Pan Heaters
« Reply #11 on: May 22, 2020, 04:32:22 PM »
Mark, just a cheap pad from Jeg's,  Pt.  # 555-32032.   Ran it 8 minutes last weekend with no problems.