Author Topic: Shoulder width vs cage size  (Read 4141 times)

Offline 1000hpJohn

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
  • Your Best Time: 8.70/154mph
  • Your Track: Norwalk, Milan Dragway
  • Your Vehicle: 8 sec. ElCamino
Shoulder width vs cage size
« on: November 03, 2019, 03:34:10 PM »
Hi guys,
  Been awhile since I was in here, back with some questions about driver fitement.

How wide of a man will a 19” cage allow with any comfort?
I’m 22” wide at shoulders and 5’10” 265lbs
I am looking very strongly at a fed and it has everything I want on it...
Thanks
John

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: Shoulder width vs cage size
« Reply #1 on: November 04, 2019, 08:40:29 AM »
I wear a 52 jacket, 6', 283#.  I have been in 22 inch cars that i couldn't drive.  My car is 19 1/2 and i drive it fine. 

Put a /20 suit on, and climb in, that's really the only way i've found to be sure.
Greg
El Dorado County, CA
www.meansracing.com

Offline hemidakota

  • Full Member
  • ***
  • Posts: 210
    • View Profile
  • Your Best Time: 7.69 @ 173.5mph
  • Your Engine: 510 B1MC Wedge
  • Your Track: sacramento raceway
  • Your Vehicle: 02 200" fed
  • General Location: west coast
Re: Shoulder width vs cage size
« Reply #2 on: November 04, 2019, 12:43:27 PM »
I am 6'3" 250, my car is 23.5" Fits me well, I have seen Greg M in his fed and he fits, I have also drove a 19.5" fed for a few years with no problems. Every car is different. I am wide at the shoulders and tall so it was difficult to get a fed that I was comfy in. Like Greg M said suit up and check it out. I am doing a pour in seat to keep my butt from moving around was my only concern with the big driver's area. Once you make a hit it does not matter if you are shoe horned in or not, You will be hooked...Greg S.
If it jams force it, if it breaks it needed replaced anyways

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: Shoulder width vs cage size
« Reply #3 on: November 04, 2019, 01:09:09 PM »
Once you make a hit it does not matter if you are shoe horned in or not, You will be hooked...Greg S.

Greg speaks the truth. 
Greg
El Dorado County, CA
www.meansracing.com