Technical > Matt Shaff's Engine Shop

Engine Moisture

<< < (2/2)

spitzerscott:
Keep the ideas coming, I'll look into all suggestions,   Thanks

sknopp:
Do you ventilate between rounds?  Get an air bed inflator and adapt it to fit your valve cover breather.  Between rounds pull both puke hoses from the covers and put the inflator on to ventilate.  Be sure to put a filter on the inlet side of the inflator. 

Dunc the Funk:
I've been thinking of using the trusty old Coleman inflator to vent as we get methanol & some water condensing in the valve covers. Up to now I've just pulled the valve covers as fast as I can after towing back but definitely going to get on with sorting it out.

spitzerscott:
We have put in a smaller set of jets and will ventilate it better, we'll try it Friday night.

32bantam:
Make sure you BLOW air into the engine....NOT SUCK it out. If the alky fumes get to the motor it may start a fire that will look like a jet engine !!!!
Ask me how I know !!!!   LOL

Navigation

[0] Message Index

[*] Previous page