Author Topic: GOT MY LICENSE...FINALLY  (Read 8710 times)

Offline cad500justin

  • Newbie
  • *
  • Posts: 28
    • View Profile
    • Copper Cadillac Racing
  • Your Best Time: 8.24@164
  • Your Engine: 500" caddy
  • Your Track: sac/bako/sonoma
  • Your Vehicle: 208" fed
  • General Location: The Altamont
Re: GOT MY LICENSE...FINALLY
« Reply #15 on: May 28, 2019, 11:07:43 PM »
CONGRATS! you're hooked now!
I run the JR fuel tire that Jon recommends. but my combo makes a BUNCH of low end torque and hits the tire hard, so I started upping the tire pressure. I usually run 8psi, unless its a really bad track I'll go up for more traction. for your combo try 7- 7-1/2 and see if you get a little more wheel speed which might help with the wheelies, or lower your launch rpm, or add weight to the front end.
like the guys said, soft on the brakes, parachute helps.

Offline George

  • Hero Member
  • *****
  • Posts: 515
    • View Profile
  • Your Vehicle: 1964 Mercury Comet Super Stock/ M automatic
  • General Location: Midwest USA
Re: GOT MY LICENSE...FINALLY
« Reply #16 on: May 29, 2019, 06:00:56 AM »
7 psi was my sweet spot. Went up for more traction.

Offline xlr8

  • Newbie
  • *
  • Posts: 28
    • View Profile
    • JEFF CHANDLER MATCO TOOLS
  • Your Best Time: 7.99 1/4 mile 166 mph
  • Your Engine: Pontiac Alcohol 428
  • Your Track: BARONA
  • Your Vehicle: 190" FED
  • General Location: west coast
Re: GOT MY LICENSE...FINALLY
« Reply #17 on: May 29, 2019, 10:25:45 AM »
Jon Hansen, I have 31 x 12 x 15 Goodyears on it, and we were running them with 9 psi. Sounds like to much pressure. I DO have two more 15 pound weights for the front.
Jeff Chandler - Matco Tools
619-991-7845
xlr8jsc@cox.net

Offline xlr8

  • Newbie
  • *
  • Posts: 28
    • View Profile
    • JEFF CHANDLER MATCO TOOLS
  • Your Best Time: 7.99 1/4 mile 166 mph
  • Your Engine: Pontiac Alcohol 428
  • Your Track: BARONA
  • Your Vehicle: 190" FED
  • General Location: west coast
Re: GOT MY LICENSE...FINALLY
« Reply #18 on: July 09, 2019, 12:22:34 PM »
We went back up this past weekend, added 30 more pounds of ballast to the front of the FED, reduced the rear tire pressure to 6.5, and went 5.65 @ 125 mph (1/8th of course). So those changes gave us more than 2 tenths! 2 more tenths will get us where we need to be and possibly run NE2 at some point in the future! Now the downside... Metal in the oil.  :(
Jeff Chandler - Matco Tools
619-991-7845
xlr8jsc@cox.net