« previous next »
Pages: [1]   Go Down

Author Topic: Rear Rims  (Read 2514 times)

Offline sawdawg

  • Newbie
  • *
  • Posts: 24
    • View Profile
  • Your Best Time: Bonneville 160mph
  • Your Engine: LS3
  • Your Track: Madras, Or.
  • Your Vehicle: Bonneville lakester
  • General Location: west coast
Rear Rims
« on: January 27, 2019, 04:04:48 PM »
I need a pair of rear rims for my FED  15 inches by 14 or 15 inches wide, 5 on 5 bolt pattern and with a 5 1/2 or 6 inch backspace
Logged

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: Rear Rims
« Reply #1 on: January 30, 2019, 01:48:22 PM »
Quote from: sawdawg on January 27, 2019, 04:04:48 PM
I need a pair of rear rims for my FED  15 inches by 14 or 15 inches wide, 5 on 5 bolt pattern and with a 5 1/2 or 6 inch backspace

That's a lot of back space for a FED.
I use a 3" and could not use anything deeper on mine.
Logged
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/

Offline sawdawg

  • Newbie
  • *
  • Posts: 24
    • View Profile
  • Your Best Time: Bonneville 160mph
  • Your Engine: LS3
  • Your Track: Madras, Or.
  • Your Vehicle: Bonneville lakester
  • General Location: west coast
Re: Rear Rims
« Reply #2 on: January 30, 2019, 04:38:22 PM »
It has a full floater rear end. The mounting surface for the wheels is 8 inches from the body. It needs that much backspace to keep the inside of the tire close to the body.
Logged
Pages: [1]   Go Up
« previous next »