Author Topic: Beadlocks, tire size, rear gear???  (Read 4433 times)

Offline tcoupekyle

  • Sr. Member
  • ****
  • Posts: 354
    • View Profile
  • Your Best Time: 4.70 1/8
  • Your Track: Houston Motorsport park
  • Your Vehicle: 225" slip joint FED
  • General Location: Houston
Beadlocks, tire size, rear gear???
« on: February 10, 2019, 02:31:00 PM »
Just got the new BBC settled in the dragster and wondering y'all's opinion on a few things.
1st the car has 15" wheels and am thinking of maybe having a set of 16 bread locked but is it necessary? What's the Advantage (other than clamp force on the bread) to a 16 v 15.
2nd car has a 3.00 gear we're thinking of going up to a 4.xx any suggestions?
3rd what size tire?

The car is a 225" slip joint fed motor is big chief headed 565 made 1100 HP at 7200rpm
Chassis builder said it weighs 1275 with a sbc no driver.  The plan is basically just go real fast and try to qualify in some local top Dragster type shootout maybe hit a few nhra divisional races.

Any recommendations?

Offline tcoupekyle

  • Sr. Member
  • ****
  • Posts: 354
    • View Profile
  • Your Best Time: 4.70 1/8
  • Your Track: Houston Motorsport park
  • Your Vehicle: 225" slip joint FED
  • General Location: Houston

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1110
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: Beadlocks, tire size, rear gear???
« Reply #2 on: February 12, 2019, 03:00:13 AM »
At your power level you should be 6.90'S or quicker and I would think 190's ! You don't need bead locks till 209 but they are a great safety item ! I wold think a 3.89 gear should be about right ! Just don't know what tire would work for you ! Car looks nice !   

Offline tcoupekyle

  • Sr. Member
  • ****
  • Posts: 354
    • View Profile
  • Your Best Time: 4.70 1/8
  • Your Track: Houston Motorsport park
  • Your Vehicle: 225" slip joint FED
  • General Location: Houston
Re: Beadlocks, tire size, rear gear???
« Reply #3 on: February 12, 2019, 04:40:25 AM »
Thanks allot!

dreracecar

  • Guest
Re: Beadlocks, tire size, rear gear???
« Reply #4 on: February 21, 2019, 02:56:37 PM »
Check with your tire selection before stepping up to a 16" .   Small selection of usable tires for a 16"wheel

Offline tcoupekyle

  • Sr. Member
  • ****
  • Posts: 354
    • View Profile
  • Your Best Time: 4.70 1/8
  • Your Track: Houston Motorsport park
  • Your Vehicle: 225" slip joint FED
  • General Location: Houston
Re: Beadlocks, tire size, rear gear???
« Reply #5 on: February 21, 2019, 06:41:14 PM »
Dre that was a big concern to me and I'm also real curious if there is an advantage to going to the taller tires that 16 would use.

dreracecar

  • Guest
Re: Beadlocks, tire size, rear gear???
« Reply #6 on: February 22, 2019, 08:38:01 AM »
Goodyear only offers a 17" wide tire for a 16"rim and that's waaaaay to wide for a dragster
M/T has a 11.5 wide tire that's 33"tall , but it takes a 15" wide rim and has a stiff sidewall --tooo bazzar for me
Hoosier has their Nost T/F tire  which is  34 x 12 x 16 but is an exclusive to the Highspeed motorsports team and you would have to go thru them to purchase
M an H has a  33.3 (104" dia)x 13 x 16 which would work well for a dragster and they offer 2 shorter dia (100") tire sizes that fit a 16"rim

  So really not  much of a selection for dragster usage over the 15" dia.
 
 A side note--- before you get beadlocks on 15" rims you must check the clearance between the brake caliper and the beadlock ring, some systems will require new mounting brackets and smaller rotors
« Last Edit: February 22, 2019, 08:40:56 AM by dreracecar »

Offline tcoupekyle

  • Sr. Member
  • ****
  • Posts: 354
    • View Profile
  • Your Best Time: 4.70 1/8
  • Your Track: Houston Motorsport park
  • Your Vehicle: 225" slip joint FED
  • General Location: Houston
Re: Beadlocks, tire size, rear gear???
« Reply #7 on: February 23, 2019, 03:45:38 PM »
That's the info I was hunting! Thanks so much Bruce! Really appreciate you taking the time and sharing.